Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Dryer Vent Cleaning Across Fontana
Dryer vent cleaning in Fontana typically costs between $129 and $249 for a standard single-story home, takes about 45 to 90 minutes, and should be done every 12 months in this climate. We work throughout Fontana’s 92335, 92336, 92337, and 92331 zip codes, often arriving within 24 to 48 hours of your call. A clogged dryer vent isn’t just about longer dry cycles. In Fontana’s hot, dry Inland Empire summers, a lint-packed vent becomes a genuine fire risk inside your wall. Call (866) 520-4943 and we’ll schedule a cleaning before you’re running loads around the clock. At Firebrick Chimney Sweep, we cover Dryer Vent Cleaning with the same serious approach we bring to chimney work. That’s because both systems share one risk: restricted, dirty ventilation that turns into a fire.
Why Firebrick Chimney Sweep Works on Fontana Dryer Vents
Most dryer vent companies in Fontana clean the vent and leave. We look at the whole exhaust path, because we work on chimneys every single day and we know how often the two systems cross. A dryer vent shoved into a deteriorated masonry flue in 92335 is a different animal than a dedicated metal duct in a 2005 build in 92337. We understand both. That’s why homeowners from Fontana call us after a handyman cleaned the vent and the dryer still wouldn’t dry. We trace the entire run, not just the accessible section. We find the crushed flex behind the unit, the bird nest at the cap, and the disconnected joint in the attic. Firebrick Chimney Sweep is led by Nelson Quijada, and the company’s scope covers venting, chimney sweeps, and structural masonry repair. One call resolves the whole problem.
We’re not a franchise. We’re not a general handyman service. Chimney and ventilation work is all we do, and that depth shows the first time you watch us run a camera into a flue and explain what you’re looking at. Serving Fontana means knowing that the housing here varies enough that generic advice fails. A 1959 stucco tract house off Arrow Boulevard and a 1998 subdivision in Northgate need completely different diagnostic approaches. We don’t guess. We look.
Styles & brands we work with
Our Dryer Vent Cleaning Services in Fontana
Every dryer vent job in Fontana includes a full inspection of the accessible duct run, lint removal from the dryer connection to the exterior termination, and a system air-flow check. We also photograph everything and explain what actually needed doing. But depending on the home, the job often extends into these areas:
Dryer Vent Cleaning
We remove built-up lint from the full duct run using professional rotary brushes and professional-grade HEPA-filtered vacuums, not a $40 kit from the hardware store. In Fontana’s older 92335 homes, we commonly find years of compacted lint layered with desert dust that stiffens into a mat the size of a dinner plate. That’s a fire waiting for a spark. We clean it out completely, then show you the before and after photos so you know the job is actually done. This is the same standard we apply to chimney sweeps in Fontana, and it’s why homeowners trust us with both systems.
Level 2 Inspection
Here’s the part most vent-cleaning companies in Fontana skip. A Level 2 inspection uses a camera to inspect the entire interior of the flue or vent, including joints, connections, and hidden sections behind walls or above ceilings. In Fontana, if a dryer or water heater vents into a masonry chimney, that chimney deserves a camera inspection. We’ve run scopes in 92335 and found cracked clay tile liners with the dryer exhaust leaking into wall cavities rather than carrying outside. That’s a carbon monoxide risk, and a lint brush will never find it. We sell the camera work because it’s the only way to know what’s really happening. If the vent is a dedicated duct, we adapt the inspection to that system and still document every section we can access.
Chimney Cap & Flashing Repair
Fontana’s Santa Ana wind season does real damage to chimney caps and flashings. A cap that loosens slightly allows debris into the flue, creates downdrafts, and lets birds or rodents nest inside. When your dryer vents through that stack, the problem isn’t just a chimney issue. It’s a dryer vent issue, because the exhaust has nowhere to go. We replace dislodged or corroded caps, re-secure flashings, and seal the termination so the vent path is clean and protected. We carry professional-grade hardware from manufacturers like Gelco, Olympia Chimney, and Famco, which are built for chimney and vent applications, not big-box generics. The parts fit correctly and they last in Fontana’s dry heat and wind.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fontana
We work with professional chimney-industry materials, and that matters when we’re repairing or replacing vent components on Fontana homes. We regularly install and service components from HeatShield for flue resurfacing, Gelco for caps and terminations, Olympia Chimney for venting systems, and Famco for connectors and specialized parts. If you need Gelco repair in Fontana, we handle it with the same trade-grade parts. These aren’t consumer-grade products you’d pick up at a hardware store. They’re what certified chimney professionals use because they’re built to handle heat, wind, and time. If we identify a bad cap or a deteriorating liner section during your dryer vent cleaning in Fontana, we likely have the right replacement part on the truck or can source it quickly. That’s the advantage of a trade specialist. No ordering the wrong size off a website and hoping it fits. We know the application before we leave your driveway.
Common Dryer Vent Cleaning Problems We See in Fontana Homes
Fontana’s climate and housing stock create a specific set of problems we see over and over. Here’s what actually shows up when we take a vent apart in this city:
- Crushed transition duct behind the dryer. The flexible foil or plastic transition connecting the dryer to the wall is the weakest point in any system. In Fontana’s tight laundry closets, the dryer gets pushed back too far and crushes this duct until it’s 80% blocked. We replace it with a rigid or semi-rigid metal transition that holds its shape, and we check the connection every time.
- Hardened lint mixed with desert dust. Fontana sits in the Inland Empire, where dry conditions and Santa Ana winds push fine dust into every exterior vent opening that isn’t sealed with a proper damper. That dust mixes with lint and bakes in the heat. A normal brush will spin over it. Removing it properly takes rotary agitation and a serious vacuum. We bring both.
- Bird and rodent nesting in exterior vent terminations. Fontana’s older neighborhoods have plenty of mature trees and nesting birds. When a dryer vent cap has a broken flap or missing screen, it’s an invitation. We open vents in 92335 and 92336 regularly that are plugged with straw, twigs, and matted lint. We clean it out, then install a proper termination with a backdraft damper so it doesn’t recur in one season.
- Dryer vents tied into old masonry flues that were never lined. This is the Fontana-specific issue we take most seriously. In the Kaiser Steel-era homes built across 92335 in the 1950s and 60s, contractors sometimes tied appliance vents into the same masonry chimney that served the fireplace. Those chimneys were built with clay tile flues, not insulated metal liners. Decades of weather, mortar erosion, and lack of use have degraded them. A dryer dumping moist, linty air into that kind of structure creates a real problem. We scope it with a camera, show you the footage, and only then discuss your options.
See the difference
Before
After
Before
After
Before
AfterPricing for Dryer Vent Cleaning in Fontana, CA
Let’s get specific, because you should know what this costs before you call. A standard dryer vent cleaning on a single-story Fontana home with a short, straight duct run runs $129 to $179. If the run is longer than 15 feet, passes through a crawlspace or attic, or hasn’t been cleaned in years, expect $179 to $249. A camera inspection of the vent (which we recommend on any older Fontana home, especially if the vent ties into a chimney) adds $89 to $149 depending on the system. Chimney cap replacement runs $195 to $385 installed, depending on the cap size and material (stainless or copper). If we find a dryer vent tied into a deteriorating flue and a liner is genuinely needed, we’ll quote that separately only after you’ve seen the camera evidence and we explain why it can’t wait. Call (866) 520-4943 for a free estimate. We quote flat prices before any work begins, and we document everything we do.
We Also Serve Cities Near Fontana
Our crews are out in the Inland Empire regularly, so if you’re next door in Bloomington, Rialto, Glen Avon, or Pedley, we cover those areas too. The same team, the same equipment, and the same no-upsell camera standard. Call (866) 520-4943 and let us know where you are. We’ll get you on the schedule for Dryer Vent Cleaning without making you chase three different companies.
Serving Fontana, CA — Our Local Coverage Area
We’re based in the Fontana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Fontana
Every 12 months is the right interval for most Fontana homes. This climate causes dust to enter the vent more than humid coastal areas, and a single year of lint and dust buildup can reduce airflow enough to double your drying times. If you have a long vent run, multiple adults doing laundry, or a gas dryer, cleaning every 6 to 9 months is smarter. Call (866) 520-4943 and we’ll clean it and tell you honestly what schedule your specific system needs.
Yes, it typically means the home has a masonry chimney that may share the dryer vent path, and those older flues bring their own set of problems. Homes from the Kaiser Steel-era build-out in 92335 often have clay-tile flues that were never lined and have since deteriorated. If your dryer exhausts into that chimney, a basic lint cleaning isn’t enough. We run a camera to confirm what’s actually happening inside the flue. We don’t recommend relining without showing you the footage first. Call (866) 520-4943 if your Fontana laundry room vents into a brick chimney, and we’ll check the whole system.
Yes, and we do both regularly for Fontana homeowners. Since we’re a full chimney company, not a vent-only operation, we can sweep the fireplace, inspect the flue, clean the dryer vent, and check the water heater connection in a single visit. It’s genuinely convenient and it means one diagnostic conversation instead of two or three. We’ll show you the camera and brush work for both systems. Call (866) 520-4943 and mention you want both done. It saves time and gives you a complete picture of every vent in the house.
Clothes taking two cycles to dry, the dryer exterior feeling hot to the touch, a burning smell when it’s running, and lint visible around the exterior vent flap are all immediate signs. Also watch for the laundry room getting unusually humid during a cycle. Those are the warnings. In Fontana’s dry heat, that trapped lint is already a fire hazard even before you notice the slower drying. Don’t wait for the dryer to shut down. Call (866) 520-4943 and we’ll get it cleaned and inspected, usually within a day or two.
Only when the camera evidence shows it’s genuinely necessary, and only after we show you that footage and explain exactly why. We never recommend a reliner on first-degree creosote or minor issues. The real fix in many Fontana homes is unsealing a rodent nest from the firebox, reattaching flashing, or replacing a crushed transition, not relining. If the flue is genuinely compromised and a liner is the correct repair, we’ll say so with evidence on screen. No scare-selling, no upsell. Call (866) 520-4943 and see the evidence yourself.
Contact Firebrick Chimney Sweep in Fontana
Your dryer vent is carrying lint, heat, and moisture out of your home every single load. It deserves a professional who actually investigates the entire run instead of just running a brush through the visible part. In Fontana, where postwar masonry flues and wind-damaged caps turn simple lint removal into a carbon monoxide investigation, that level of inspection matters more than anywhere else in the Inland Empire. We show you the camera footage, we explain what we found, and we fix what actually needs fixing. Nothing more. Call (866) 520-4943 for a free estimate, or to schedule a cleaning and inspection. We’ll get you on the schedule and give you a straight answer before we touch anything.
Written by Nelson Quijada, Owner at Firebrick Chimney Sweep, serving Fontana’s dryer vent and chimney needs with camera-verified work and no upsell.