Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Fontana, CA
Chimney repair in Fontana means working on 1950s masonry fireplaces in Kaiser-era ranch homes and 1980s factory-built flues in newer subdivisions, all in a climate where Santa Ana winds and 100°F summers do real damage to caps, crowns, and flashings. Firebrick Chimney Sweep handles the full range: liner installation, crown repair, flashing work, and cap replacement, using professional-grade materials like HeatShield and Gelco. When a Fontana home inspector flags a chimney before a sale, that’s often the call that brings us out. Call (866) 520-4943 for a free estimate.
Why Fontana Homes Are Different
Fontana’s chimney stock splits into two distinct generations, and each one fails differently. The 1950s and 60s stucco tract homes built for Kaiser Steel workers, concentrated in 92335, have true masonry chimneys with clay tile liners and mortared brick. Those chimneys have now weathered sixty-plus years of hot, dry Inland Empire summers followed by the abrasive Santa Ana winds that loosen mortar, lift caps, and drive dust into every gap. We regularly find fireboxes in these homes plugged with a mix of hardened creosote, desert dust, and nesting material from birds that got in through a missing cap.
The 1980s through 2000s subdivisions in 92336 and 92337 tell a different story. Those homes mostly have prefabricated metal fireboxes with factory-built flue systems, which need specialized brush heads and a different inspection standard than masonry. The common thread across all of Fontana is the long idle season: fireplaces get used a handful of winter weeks, then sit unused from March through November while creosote hardens and wildlife moves in. By the time we arrive, the job is rarely just a sweep – it’s clearing a blockage, repairing what the wind loosened, and making the system safe for another year or for a real estate transaction.
Styles & brands we work with
Our Main Fontana Services
Most Fontana homeowners reach out to us for one of two reasons: a chimney that has not been cleaned in years and is now blocking, drafting poorly, or full of debris, or a dryer vent that is not drying clothes and has become a fire hazard. Both are ventilation problems with the same underlying risk.
Chimney Sweep in Fontana
A chimney sweep in Fontana nearly always starts with an inspection, because the long dry season between uses means we find blockages a simple brushing would miss. We clear out bird nests, rodent debris, and hardened creosote, then check the flue liner, cap, and crown for wind damage from the Santa Anas. For the older masonry homes in 92335, we pay close attention to mortar joints and flashing, since those are the first things to fail after decades of heat and wind. See the full breakdown on our Chimney Sweep in Fontana page.
Dryer Vent Cleaning in Fontana
Dryer vent cleaning in Fontana is not a side service for us – it is part of the same combustion safety discipline that drives our chimney work. Lint accumulates in the vent run, restricts airflow, and raises the dryer’s internal temperature until the lint itself can ignite. In many Fontana homes, the dryer vent runs through a wall or crawlspace and has never been cleaned since the house was built. We clean the full run from dryer to exterior termination and check the hood and damper. Details are on the Dryer Vent Cleaning in Fontana page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Fontana
Chimney repair in Fontana usually begins with something a homeowner or a home inspector noticed: a water stain on the ceiling near the chase, a cap that is loose or missing after a wind event, or a flue liner that has cracked and spalled. The Kaiser-era masonry chimneys in 92335 are old enough now that crowns are crumbling and clay liners show vertical cracks, while the 1980s factory-built systems in 92336 and 92337 often need flashing or cap work where the metal chimney penetrates the roof. We repair what the wind and heat have loosened, and we use materials built for this climate: HeatShield resurfacing to restore deteriorating flue liners, Gelco crown compounds for watertight caps, and heavy-gauge replacements for missing or damaged components. That is the same full-service repair scope we describe on our Chimney Repair hub page.
Chimney Cap Installation
Signs you need it
An uncapped or missing cap lets birds, rodents, rain, and Santa Ana-driven debris straight into the flue.
What it costs in Fontana
Chimney cap installation in Fontana typically runs $250 to $550 depending on flue size and access.
How we do it
We measure the flue, select a correctly sized cap suited to Fontana’s wind exposure, secure it to the flue tile or crown, and verify the draft is unobstructed.
Chimney Flashing Repair
Signs you need it
Water stains on the ceiling near the chimney, rusted flashing, or visible gaps where the chimney meets the roof deck signal flashing failure.
What it costs in Fontana
Chimney flashing repair in Fontana generally costs $450 to $950 depending on chimney height and roof pitch.
How we do it
We cut back the old flashing, install new step and counter flashing sealed with a high-temperature polymer sealant, and test the seal for water intrusion.
Chimney Crown Repair
Signs you need it
Crumbling concrete, visible cracks, or pooling water on top of the chimney mean the crown is no longer shedding water.
What it costs in Fontana
Chimney crown repair in Fontana typically runs $350 to $700 for a full recoat or partial rebuild.
How we do it
We clean and prepare the crown, repair any structural cracks, and apply a Gelco crown sealer or a new mortar layer sloped to direct water away from the flue.
What Chimney Repair Costs in Fontana
| Item | Typical range in Fontana |
|---|---|
| Chimney cap installation | $250 – $550 |
| Chimney crown repair | $350 – $700 |
| Chimney flashing repair | $450 – $950 |
Does chimney repair require a permit in Fontana?
Most cap, crown, and flashing repairs fall under routine maintenance and do not require a City of Fontana building permit; full liner replacement or structural rebuilds may, and we can tell you which side your job falls on before starting.
Can you repair a chimney before a home sale closes?
Yes. We do pre-sale make-safe repairs for Fontana escrows, with photo documentation for the buyer’s agent, the seller, and the lender, usually completing before the inspection contingency deadline if we are called early enough. Call (866) 520-4943 for scheduling.
Brands We Service in Fontana
We stock and install components from HeatShield, Gelco, Olympia Chimney, and Famco, so a liner repair or crown replacement in Fontana does not wait on a hardware-store substitute. Most common parts for our area’s masonry and factory-built systems are in the truck the first visit. See our brands for the full list of what we work with.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Fontana, CA
| Service | Typical range in Fontana |
|---|---|
| Chimney sweep (masonry fireplace, 92335) | $189 – $279 |
| Chimney sweep (factory-built fireplace, 92336/92337) | $169 – $249 |
| Chimney cap installation | $250 – $550 |
| Chimney crown repair | $350 – $700 |
| Chimney flashing repair | $450 – $950 |
| Chimney liner installation (stainless, per lineal foot) | $125 – $225 |
| HeatShield resurfacing (per square foot of flue) | $150 – $300 |
| Dryer vent cleaning | $129 – $199 |
In Fontana, two things push chimney pricing up: access on steep two-story roofs where the 1980s tract homes in 92337 sit tight against neighboring structures, and the extra time required to remove wildlife nests and hardened creosote from chimneys that sat unused through a full Inland Empire summer. Every price above is an agreed range before work begins, and we walk you through what we found before you approve a single repair.
Neighborhoods We Serve in Fontana
We work across Fontana’s ZIP codes, from the Kaiser-era blocks near downtown to the newer subdivisions on the north and south ends. Our service area includes:
- 92335 – central Fontana and the original Kaiser Steel-era neighborhoods
- 92336 – north Fontana and the residential blocks east of Sierra Avenue
- 92337 – south Fontana and the Summit Heights area
- 92331 – far west Fontana near the Jurupa Hills boundary
Most Fontana chimneys can be serviced within a few business days of your call, and we consolidate routes through the Inland Empire so you are not waiting on a technician coming from the coast.
Service Area – Cities Near Fontana
Beyond Fontana, our crews regularly work in the neighboring Inland Empire communities that share the same housing stock, wind patterns, and fire-safety concerns. We serve Bloomington, CA directly to the west, Rialto, CA to the north, Glen Avon, CA across the Jurupa range, and Pedley, CA to the south. If you are on the Fontana edge and not sure which city you are in, call and we will get you to the right schedule.
Serving Fontana, CA — Our Local Coverage Area
We’re based in the Fontana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Fontana
Most Fontana appointments are scheduled within three to five business days. Pre-sale inspection deadlines take priority, so mention the escrow date when you call (866) 520-4943 and we will work within your timeline.
Most Fontana HOAs regulate exterior appearance, not interior fireplace maintenance, and cap replacement on the roof side is rarely contested. We can match cap and chase finishes to the existing roof color when an association has a view-restriction clause.
Yes. Our technicians are trained on the older masonry fireplaces common in 92335 and the prefabricated metal systems in 92336 and 92337, which require different brushes, liners, and inspection procedures. Both are covered by the same call.
If you live in Fontana and your chimney has not been looked at in years, or a home inspector flagged it this week, call (866) 520-4943. We will schedule a sweep or repair with an honest diagnosis and a flat-price quote before any work begins.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fontana Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
— Gabriela Torres"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
— Robert Sullivan"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
— Laura Bennett