Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Temecula, CA
Chimney repair in Temecula usually means one of two things: a rusted chase cover on a 1990s prefab fireplace in a Redhawk or Paloma del Sol tract home, or cracked firebrick and a failing liner in a masonry chimney out toward Wine Country. Firebrick Chimney Sweep handles both, and we’ve served Temecula since 2012. When you call (866) 520-4943, you get a chimney company that diagnoses the whole system, not just the part that looks dirty.
Most Temecula homes were built from the late 1980s through the 2000s. That means factory-built metal fireboxes and direct-vent gas inserts dominate, and the failure points here are heat-damaged chase covers, corroded storm collars, and critter nests in flues that sat unused through a long inland summer. Our job is to know which system you have before we touch it, because the repair path, the materials, and the cost are completely different depending on the answer.
Why Temecula Homes Are Different
Temecula’s chimney market is split in two. The master-planned, HOA-governed tracts of 92591 and 92592 – Redhawk, Temeku Hills, Paloma del Sol, Vintage Hills – were built mostly from the late 1980s through the 2000s with factory-built prefab fireboxes and direct-vent systems. These are not masonry chimneys. They are metal chase enclosures with a flue pipe inside, and the parts most likely to fail are the galvanized chase cover on top, the storm collar where the pipe exits, and the flashing at the roofline.
The semi-rural estate and equestrian properties out toward Wine Country and the De Portola corridor in 92592 and 92590 are a different world. Real masonry chimneys, wood-burning fireplaces, and the occasional whole-house wood stove. Those systems accumulate actual creosote and need true sweeping plus documented inspections. The job in Temecula is rarely “grab a brush” – it is knowing which of those two worlds you are walking into, because the service, the creosote narrative, and the code expectations are completely different.
Hot inland Riverside County summers and mild, mostly dry winters mean fireplaces sit unused for months. The local failure mode is not heavy creosote buildup. It is birds and squirrels in the flue, debris packed around the damper, and chase covers and flashing that crack under intense summer sun and dry Santa Ana wind events. When a Temecula homeowner calls for a sweep, the actual fix is often replacement of a part that has been quietly failing for years.
Styles & brands we work with
Our Main Temecula Services
Temecula homeowners call us most about two things: getting a fireplace or wood stove safely running again, and clearing the dryer vent that has not been touched since the house was built.
Chimney Sweep in Temecula
In Temecula tract homes, a chimney sweep often starts with a camera inspection of a prefab flue that has never been cleaned – because the original buyer rarely used the fireplace. In the Wine Country estates, we are sweeping real creosote from masonry flues and wood stove connectors, then documenting the work for insurance and resale records. The full scope of what a sweep covers in Temecula, including pricing and what we find in local homes, lives on our dedicated page: Chimney Sweep in Temecula.
Dryer Vent Cleaning in Temecula
Dryer vents and chimneys share the same core risk: restricted, dirty ventilation that becomes a fire. We treat both with the same seriousness. In Temecula’s two-story tract homes, dryer vents often run long horizontal distances through interior walls and attics, collecting lint where no homeowner can see it. That is why we include a before-and-after camera report with every vent cleaning. Details on our process and local pricing are on the Dryer Vent Cleaning in Temecula page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Temecula
Chimney repair in Temecula is dominated by prefab chase cover and flashing failures in 1980s-2000s tract housing, where the metal components on the roof have been cooked by a decade or more of inland sun and Santa Ana winds. The original galvanized covers rust through, water gets into the chase, and the homeowner sees staining on the ceiling or hears dripping inside the firebox. That is a repair, not a sweep – and we do it in-house. When we identify rust, cracked firebrick, a warped damper, or a deteriorated flue liner, the fix stays with us. No referrals, no second contractor. If the problem requires a full Chimney Repair scope, we walk you through the options with camera evidence so you can see exactly what we are seeing.
Chimney Cap Installation
Signs you need it
You hear birds or animals in the firebox, see nesting material on the damper, or find water staining inside the firebox after rain.
What it costs in Temecula
Chimney cap installation in Temecula typically runs $200 to $700 depending on the flue size and whether we are fabricating a custom chase cover for a prefab system.
How we do it
We measure the flue or chase opening, select or fabricate a stainless or copper cap sized for proper draft, secure it at the crown or chase top, and verify the draw with a smoke test.
Chimney Cap Replacement
Signs you need it
A rusted-through or missing cap, water pooling around the flue tile, or a cap that has blown off in a Santa Ana event are all replacement triggers.
What it costs in Temecula
Replacing an existing cap in Temecula runs $180 to $650, with the higher end covering custom chase covers on larger prefab enclosures.
How we do it
We remove the failed cap, inspect the flue and chase top for hidden water damage, install the correctly sized replacement, and seal every penetration so wind-driven rain stays out.
Chimney Liner Installation
Signs you need it
Flaking tile shards in the firebox, visible gaps or cracks in the flue during a camera inspection, or a gas appliance venting into an unlined or deteriorating masonry flue.
What it costs in Temecula
Chimney liner installation in Temecula typically runs $2,500 to $6,000, with the final figure driven by flue length, access, and whether we are relining a masonry or prefab system.
How we do it
We run a camera to document the existing condition, size the new liner for the appliance and fuel type, install it with proper insulation where code requires, and reconnect the appliance to verify draft and CO clearance.
Chimney Flashing Repair
Signs you need it
Water staining on the ceiling near the chimney, damp drywall in the attic chase, or visible gaps and lifted flashing at the roofline.
What it costs in Temecula
Chimney flashing repair in Temecula typically runs $350 to $900, depending on whether we are resealing existing flashing or replacing stepped flashing around a masonry chimney.
How we do it
We lift the shingles around the chimney, remove the failed flashing, install new step and counter-flashing with proper overlap, and seal with a polyurethane caulk rated for high-heat exposure.
Chimney Crown Repair
Signs you need it
A cracked, spalled, or crumbling concrete crown on a masonry chimney, usually visible from the ground or during a roof inspection.
What it costs in Temecula
Crown repair in Temecula runs $500 to $1,500 when we can resurface; a full crown rebuild with proper overhang and drip edge lands at the top of that range.
How we do it
We grind away loose material, build or resurface the crown with the correct slope away from the flue, and finish with a flexible, weatherproof sealant that handles Temecula’s summer expansion cycles.
What Chimney Repair Costs in Temecula
| Item | Typical range in Temecula |
|---|---|
| Chimney cap installation | $200 – $700 |
| Chimney cap replacement | $180 – $650 |
| Chimney liner installation | $2,500 – $6,000 |
| Chimney flashing repair | $350 – $900 |
| Chimney crown repair | $500 – $1,500 |
What pushes cost up in Temecula is access. Two-story roof pitches in Redhawk and Temeku Hills mean more ladder work and safety rigging. HOA communities sometimes require pre-approval for visible exterior changes, and we can guide you through that. We price the job before we start and nothing changes unless you approve it in writing.
Do I really need a new liner, or can the old one be repaired?
You only need a new liner if the camera shows cracks, gaps, or spalling that compromise the flue’s ability to contain heat and combustion gases. If the damage is surface-level, HeatShield ceramic resurfacing can restore the liner at roughly half the cost of full relining. We show you the camera footage either way, so the recommendation is based on evidence you can see. Call (866) 520-4943 for an exact quote, estimates are free.
How long does chimney repair take in Temecula?
A cap replacement or flashing repair is a same-day job. A liner installation takes one to two days depending on flue height and access. Crown rebuilds need a day plus cure time before rain exposure. We schedule around Temecula’s dry season when possible, but we will not leave a repair exposed if rain is forecast. Call (866) 520-4943 and we will give you a real timeline, not a guess.
Brands We Service in Temecula
We work exclusively with professional-grade chimney industry products. That means DuraFlex liners, HeatShield ceramic resurfacing material, Gelco chase covers, Olympia Chimney caps and dampers, Famco components, and Copperfield flashing and termination kits. We keep the common parts for Temecula’s prefab-heavy housing stock available at short notice. Full details on every brand we stock and service are on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Temecula, CA
| Service | Typical range in Temecula |
|---|---|
| Chimney sweep (standard prefab) | $150 – $250 |
| Chimney sweep (masonry with creosote buildup) | $250 – $500 |
| Chimney inspection (Level 1 camera) | $100 – $200 |
| Chimney cap installation | $200 – $700 |
| Chimney cap replacement | $180 – $650 |
| Chimney liner installation | $2,500 – $6,000 |
| Chimney flashing repair | $350 – $900 |
| Chimney crown repair | $500 – $1,500 |
| Dryer vent cleaning | $100 – $250 |
| Dryer vent cap / termination replacement | $150 – $350 |
Two things push Temecula pricing upward more than anything else: two-story HOA roof access that requires additional safety rigging, and deferred maintenance that has allowed a small rust issue to become a structural one. We give you a flat price before any work begins, and the number on that quote is the number you pay. No surprise add-ons after we are on the roof.
Neighborhoods We Serve in Temecula
We work throughout Temecula’s ZIP codes: 92590, 92591, 92592, and 92593. The tract-home communities need a different inspection checklist than the estate properties, and our techs know what to look for in each.
- Redhawk (92592)
- Temeku Hills (92591)
- Paloma del Sol (92591)
- Vintage Hills (92591)
- Wine Country / De Portola corridor (92590 & 92592)
Most Temecula appointments can be scheduled within a week, and we batch jobs in the same part of the city to keep travel time from inflating your quote. Emergency leak calls during winter rain events get priority.
Service Area – Cities Near Temecula
Beyond Temecula, Firebrick Chimney Sweep regularly works in the surrounding southwest Riverside County communities. We cover Murrieta Hot Springs, CA for its mix of older ranchers and newer tracts, Murrieta, CA with its similar 1990s housing stock, Rainbow, CA for rural properties with true masonry chimneys, and Wildomar, CA where larger lots mean more wood stoves and freestanding fireplaces. Same pricing, same camera-evidence standard, same full-service repair capability.
Serving Temecula, CA — Our Local Coverage Area
We’re based in the Temecula area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Temecula
Many Temecula HOAs require approval for exterior changes, including visible chimney caps or chase covers. We can provide spec sheets and photos for your HOA application. Interior repairs like liner installation or firebox work typically do not need HOA sign-off, but a permit may be required for liner or structural work depending on scope. We will tell you what to file and what we handle.
If you have active water intrusion, call (866) 520-4943 and we will prioritize you. During Temecula’s winter rain events, we reserve same-week slots for leak and water-damage calls. Dry-season non-emergency repairs are usually scheduled within five to seven business days. The sooner we see the leak, the less water damage behind the drywall.
Yes. We work with home inspectors, insurance carriers, and fire marshals on documented deficiency reports. Our camera inspection includes full photo and video documentation that you can share with a buyer, lender, or insurance adjuster. If the inspection turns up a repair, we can complete it within the same relationship, no second contractor needed.
If your Temecula chimney has a problem or you just want an honest look before burning season, call Firebrick Chimney Sweep at (866) 520-4943. We will tell you what is actually wrong, show you the camera proof, and fix it if it needs fixing. One company, no referrals.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Temecula Customers Say
"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
— Robert Sullivan"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
— Laura Bennett"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
— Lucia Ramirez