Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in San Antonio Heights, CA
Chimney repair in San Antonio Heights usually means addressing a masonry fireplace built between the 1920s and 1960s that has had decades of exposure to foothill weather, pine needle accumulation, and Santa Ana winds. The homes sit tight against the San Gabriel foothills, and chimneys here take more punishment than most: uncapped flues fill with oak leaves and pine duff, flashing gets hammered by wind-driven rain, and older clay liners crack under the heat cycles of a chimney that still does real heating work. We handle the repair side and the sweeping side under one roof, so whatever a chimney inspection finds here gets resolved without handing you off to another contractor. Call (866) 520-4943 for a free estimate.
Why San Antonio Heights Homes Are Different
Walk any street up Euclid toward the foothills and you’ll see what we deal with daily: 1920s Craftsman bungalows and mid-century ranch homes with original masonry chimneys that predate modern liner standards. Cooler foothill winters push fireplaces past decorative status, and the tradeoff is predictable. Creosote builds faster, mortar joints take on water during the heavier rain this elevation gets, and uncapped flues collect needles from the pines and oaks that surround nearly every property. Santa Ana events add another wrinkle: draft surges that pull hot embers up a chimney are a bigger deal when the surrounding hillsides have real wildfire history. The pattern we see over and over in San Antonio Heights is a chimney that looks fine from the yard but shows liner damage or blockages the moment a camera goes up the flue.
This is not the flat, mild valley floor. The elevation shifts irrigation schedules, roof pitch, and how often a chimney gets used; it also makes gutter-level chimney flashing failure a more common call than in neighboring Upland, CA or Claremont, CA. Homeowners here tend to have a fire marshal or home inspector flag in hand when they call us, and they want the issue resolved with materials that match the age of the house, not a patch job. That’s the work we do.
Styles & brands we work with
Our Main San Antonio Heights Services
Two services account for most of what San Antonio Heights homeowners call us about: chimney sweeping and dryer vent cleaning. Both are fire-prevention work, and both get ignored until either a cold snap or an inspection report forces the issue.
Chimney Sweep in San Antonio Heights
A chimney sweep in San Antonio Heights starts as a cleaning but works as a system check: we remove creosote and debris, then document what the flue, cap, crown, and smoke shelf actually look like. Homes here commonly have uncapped or poorly capped flues, so we pay close attention to pine needles and leaf litter, which compact into blockages faster than most homeowners expect. Every sweep is followed by a phone call that tells you plainly what we found and whether anything needs repair. Chimney Sweep in San Antonio Heights has the full breakdown of what a sweep covers and what it costs.
Dryer Vent Cleaning in San Antonio Heights
Dryer vents in older San Antonio Heights homes are frequently long horizontal runs that terminate under the eaves, sometimes capped with louvered covers that collect foothill dust. That lengthens drying time and allows lint to back up in the pipe, which is a straightforward combustion risk. We use professional-grade tools to clear the full run, verify airflow at the exterior vent, and show you the removed blockage. Dryer Vent Cleaning in San Antonio Heights covers pricing, signs of a clogged vent, and what the job involves.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in San Antonio Heights
Chimney repair in San Antonio Heights tends to involve the upper third of the system: caps that were never installed, crowns that cracked under repeated freeze-thaw cycles, flashing that separated from the roofline, and clay liners that show the right kind of damage to make relining a genuine safety issue. When people pull records on 1920s-to-1960s homes, most find the flue liner is original, which means it was sized for a hotter-burning open fireplace and has been absorbing creosote for seventy years or more. Foothill rain and Santa Ana winds accelerate the deterioration; water entry through a cracked crown migrates into the smoke chamber and accelerates mortar breakdown in ways a visual inspection never catches. That’s why we lead with a camera inspection, and why we can resolve what the camera finds without sending you to a mason or a materials supplier. Chimney Repair is part of the same company that sweeps the chimney, which means one diagnosis, one point of contact, and no padding the quote with middlemen.
Chimney Cap Installation
Signs you need it
An open flue gathers pine needles and oak leaves in a matter of weeks in San Antonio Heights, and a missing or undersized cap on an older masonry chimney is the single most common repair-worthy condition we document.
What it costs in San Antonio Heights
Chimney cap installation in San Antonio Heights typically runs $225 to $600 depending on the flue dimensions and whether we need to grind a custom fit for an oversized or odd-shaped tile liner.
How we do it
We measure the flue tile at the crown, size a cap with proper mesh spacing for spark arrest, secure it with tap-in concrete screws or a draw-band, and bed the base where needed.
Chimney Cap Replacement
Signs you need it
A rusted cap, torn mesh that now lets embers through, or a cap that has lifted off the flue tile after a Santa Ana event is a failed spark-arrestor that should be replaced before fire season.
What it costs in San Antonio Heights
Chimney cap replacement in San Antonio Heights commonly costs $250 to $650; removing a seized or over-mortared cap adds a bit more labor, and larger multi-flue caps on estates run toward the top of that range.
How we do it
We remove the old cap without damaging the crown, verify whether the flue tile itself has spalled, then install a properly sized replacement with new mechanical fasteners.
Chimney Liner Installation
Signs you need it
Cracked clay tiles, gaps between tile sections, or a liner that cannot be verified with a camera scan after a fire or after years of unmaintained use means the chimney is not safe to burn until a new liner goes in.
What it costs in San Antonio Heights
Chimney liner installation in San Antonio Heights generally runs $3,500 to $6,500; a full our brands professional-grade stainless system, including insulation and top plate, typically lands between $4,000 and $6,500.
How we do it
We camera the flue, size the liner to the appliance and height, drop the liner in from the top, insulate if the clearance demands it, and anchor the assembly with a top plate and rain collar.
Chimney Flashing Repair
Signs you need it
Water staining on the ceiling near the chimney, a rusted flashing apron, or loose counter-flashing after heavy foothill rain means water has found a path between the chimney and roof.
What it costs in San Antonio Heights
Chimney flashing repair in San Antonio Heights typically runs $300 to $750, with the work required depending on whether we can re-seal and re-fasten the existing flashing or need to cut and install new step flashing at the roofline.
How we do it
We inspect the roof-to-chimney junction, remove or re-work the existing flashing, install new base and counter-flashing where needed, and seal with polyurethane caulk rated for masonry exposure.
Chimney Crown Repair
Signs you need it
A spalling crown, a crown with hairline cracks running across the full width, or standing water pooled on top of the chimney after rain is how water begins destroying the flue and smoke chamber from the top down.
What it costs in San Antonio Heights
Chimney crown repair in San Antonio Heights commonly runs $350 to $850, with a full tear-out-and-recrown on a badly deteriorated crown running higher depending on the crown’s footprint and access.
How we do it
We build a form, pour a new crown with proper overhang and slope, trowel it to direct water away from the flue, and re-bed the cap on top once the crown cures.
What Chimney Repair Costs in San Antonio Heights
| Item | Typical range in San Antonio Heights |
|---|---|
| Chimney cap installation | $225 – $600 |
| Chimney cap replacement | $250 – $650 |
| Chimney liner installation | $3,500 – $6,500 |
| Chimney flashing repair | $300 – $750 |
| Chimney crown repair | $350 – $850 |
How do I know if my San Antonio Heights chimney needs the liner replaced or just swept?
A sweep and camera inspection settles this. If the camera shows intact clay tile with only creosote buildup, a mechanical sweep handles it. If it shows cracked or missing tile sections, the chimney cannot safety draft and a liner is required.
Can you repair an original 1940s masonry chimney in San Antonio Heights without rebuilding the whole thing?
Usually, yes. Most repair work involves the cap, crown, flashing, and liner, and the original brick and mortar shell stays. Rebuilds are only needed when structural cracks run through the masonry itself, which is rare but does occur on older foothill chimneys.
Brands We Service in San Antonio Heights
We install and service professional-grade chimney components from Gelco, Olympia Chimney, Famco, and Copperfield. These are the suppliers professionals specify, not consumer-grade substitutes from a hardware store, and we keep common cap sizes and flashing stock available so most San Antonio Heights repairs can move without waiting on a special order.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in San Antonio Heights, CA
| Service | Typical range in San Antonio Heights |
|---|---|
| Chimney cap installation | $225 – $600 |
| Chimney cap replacement | $250 – $650 |
| Chimney liner installation | $3,500 – $6,500 |
| Chimney flashing repair | $300 – $750 |
| Chimney crown repair | $350 – $850 |
Price in San Antonio Heights is pushed upward by access: steep foothill lots, taller chimneys on two-story estates, and roofs with a pitch that requires staging rather than ladder work. We quote a flat price before any work begins, so the number we give you is the number on the invoice.
Neighborhoods We Serve in San Antonio Heights
We cover all of San Antonio Heights within the 91784 ZIP code, from the older homes along Euclid Avenue up into the foothill lanes where lots get larger and chimneys get harder to reach. Our typical response time in the area is two to four business days for a sweep, with repair work scheduled based on material availability and the scope of the job.
- Euclid Avenue corridor
- Mountain Avenue foothill side
- Alpine Street area
- Brahma Drive district
- Rossmore and the larger estate lots
Service Area – Cities Near San Antonio Heights
We run scheduled routes into San Antonio Heights and the neighboring foothill and valley communities, so appointments batch efficiently and pricing stays honest. That means homeowners in Upland, CA, Claremont, CA, Rancho Cucamonga, CA, and Montclair, CA can schedule the same camera-inspection-first service without chasing a contractor from the city.
Serving San Antonio Heights, CA — Our Local Coverage Area
We’re based in the San Antonio Heights area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in San Antonio Heights
We can usually schedule a repair estimate within two to four business days in the 91784 ZIP code, with emergency cap and flashing work getting priority during the fall before the first cold snap puts fireplaces back into active use. Same-week appointments are common for sweeps and dryer vent work.
Every repair project is different, but most chimney work in San Antonio Heights involves component-level repairs that don’t require a building permit. Liner replacements and full rebuilds fall under different rules; we check the current local requirements before scheduling and tell you exactly what applies to your job.
Yes. Many San Antonio Heights homeowners call us after a home inspector or fire marshal flags the chimney. We’ll review the report, camera-inspect the flue to verify what’s real, and give you a repair plan that addresses the specific deficiency cited, along with photos you can send back to the inspector or HOA.
Call Firebrick Chimney Sweep at (866) 520-4943 to schedule a chimney inspection, sweep, or repair estimate in San Antonio Heights. We’ll give you a straight answer, with camera documentation, and a flat price before any work starts.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What San Antonio Heights Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
— Scott Ziegler"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
— Carmen Garcia"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
— Gabriela Torres