Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Running Springs, CA
Chimney repair in Running Springs usually falls into two categories: freeze-thaw damage to exterior masonry, and creosote or liner deterioration from heavy pine burning. Homes here sit at 6,000 feet, many built between the 1940s and 1970s, and their chimneys take real abuse from snow load, wind, and long burn seasons. We inspect first, show you exactly what we find, and fix what actually needs fixing. Call (866) 520-4943 for a repair or cleaning quote.
Why Running Springs Homes Are Different
Running Springs sits high enough that winter is not a season, it is a structural test. Snow piles against chimney caps, freezes at night, thaws by afternoon, and repeats the cycle for months. Crowns crack. Mortar joints open up. Flashing pulls away from the roofline. And because most homes here are older mountain cabins or mid-century vacation properties, the masonry is often original, which means it has already survived fifty or sixty winters before we ever look at it.
The heating reality is just as demanding. Cold weather from October through April means wood stoves and fireplaces run nearly every evening. Homeowners burn pine and fir, sometimes green, and creosote accumulates quickly in flues that were not designed for that much sustained use. Meanwhile, cabins that sit vacant for weeks or months let snow pack around caps and give birds, squirrels, and rodents the quiet they need to build nests inside flues. A chimney that worked fine in October can be obstructed by April without anyone noticing. That is why we treat every Running Springs job as a full inspection, not just a sweep. The conditions here demand more than seasonal maintenance.
Styles & brands we work with





Our Main Running Springs Services
Most Running Springs homeowners call us for two reasons: a chimney that needs cleaning before or after the burn season, and a dryer vent that has not been touched since the house was built. Both are ventilation problems, and both are fire hazards when ignored.
Chimney Sweep in Running Springs
A proper sweep in Running Springs means removing creosote from the full flue system, checking the cap and crown for freeze-thaw damage, and making sure no animal has moved in during the off-season. On cabins that were vacant all winter, we regularly find nests, cracked caps, and glazed creosote that a basic brush cannot remove. That heavier creosote, common after months of pine burning, calls for rotary cleaning methods, not a quick scrape. We also check the firebox, damper, and smoke shelf, because a chimney that sweeps clean can still draft poorly if those components are damaged. Chimney Sweep in Running Springs.

Dryer Vent Cleaning in Running Springs
Mountain homes often route dryer vents through long, winding paths to reach an exterior wall, and lint accumulates at every bend. Cold temperatures make the lint stick to vent walls and condense with moisture, narrowing the passage and forcing the dryer to work harder. That restricts airflow, and restricted airflow is what pushes lint temperatures past ignition point. Dryer Vent Cleaning in Running Springs.

What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Running Springs
Chimney repair in Running Springs usually comes down to water and freeze-thaw damage. The housing stock here, much of it built between the 1940s and 1970s, uses masonry chimneys and exterior chases that take snow, ice, and wind for months at a time. Crowns crack, mortar joints erode, and flashing pulls loose. The result is water intrusion, and water intrusion is what turns a cosmetic crack into a structural problem within a season or two. Firebrick handles both the diagnosis and the repair, so a sweep that reveals liner damage or a broken cap does not end with a referral to someone else. You call one company, and we fix it. That includes advanced liner restoration using HeatShield ceramic resurfacing, which can save a deteriorating flue without a full relining job. For the full scope of what we repair, see our Chimney Repair page.
Chimney Cap Installation
Signs you need it
You see rusted, missing, or warped cap flashings, and you hear water dripping into the firebox during storms.
What it costs in Running Springs
Expect to pay roughly $250 to $550 for a fitted stainless or copper cap installed at 6,000 feet.
How we do it
We measure the flue opening, select a cap rated for snow load, and secure it with mechanical fasteners, not adhesive.
Chimney Cap Replacement
Signs you need it
The existing cap has rusted through, shifted off center, or filled with debris that keeps birds out but blocks draft.
What it costs in Running Springs
Replacement typically runs $200 to $450 depending on flue size and the condition of the masonry underneath.
How we do it
We remove the old cap, inspect the flue tile below for damage, and install the replacement with snow-rated clearance.
Chimney Liner Installation
Signs you need it
A sweep reveals cracked flue tiles, missing mortar between tiles, or liner pitting that would ignite creosote at high heat.
What it costs in Running Springs
Liner installation with DuraFlex stainless components falls between $2,200 and $4,500 depending on flue height and access.
How we do it
We measure, size, and install an insulated liner rated for continuous wood-burning, then verify draft and clearances.
Chimney Flash Repair
Signs you need it
You see water stains on the ceiling near the chimney chase, and the flashing is lifting, rusting, or missing sections.
What it costs in Running Springs
Repair runs $400 to $850 including resealing or replacing the flashing and re-securing it to the chimney chase.
How we do it
We cut out failed flashing, install new sheet metal shaped to your chimney, and seal the transition with a polyurethane caulk that holds through freeze-thaw.
Chimney Crown Repair
Signs you need it
The crown has hairline cracks, spalling concrete, or a shape that lets water pool instead of shedding off the edge.
What it costs in Running Springs
Crown repair runs $450 to $800 for resurfacing, or $1,200 to $2,000 for a full recast with proper overhang.
How we do it
We remove the degraded cement, build a form, and pour a new crown with a drip edge that keeps water off the brick face.
What Chimney Repair Costs in Running Springs
| Item | Typical range in Running Springs |
|---|---|
| Chimney cap replacement | $200 – $550 |
| Chimney flashing repair | $400 – $850 |
| Chimney crown repair | $450 – $2,000 |
| Chimney liner installation | $2,200 – $4,500 |
How do I know if my Running Springs chimney needs repair or just a sweep?
A sweep removes buildup. Repair fixes structural or water damage. If you see cracked masonry, rust staining, water inside, or a draft that got worse, call us for an inspection before you burn again.
Can you fix freeze-thaw damage on mountain chimneys?
Yes. We routinely replace cracked crowns, re-point mortar, and install caps sized for snow load. The key is addressing water entry before the next winter cycle worsens it.
Brands We Service in Running Springs
We stock and install components from HeatShield, Gelco, Olympia Chimney, and Famco. These are professional chimney industry suppliers, not hardware-store substitutes. Because we keep parts on hand for common Running Springs repairs, most cap and crown jobs move faster than a big-box special order would. See our brands for more detail.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Running Springs, CA
| Service | Typical range in Running Springs |
|---|---|
| Chimney cap replacement | $200 – $550 |
| Chimney cap installation | $250 – $550 |
| Chimney flashing repair | $400 – $850 |
| Chimney crown repair | $450 – $2,000 |
| Chimney liner installation | $2,200 – $4,500 |
What pushes price up in Running Springs is access. Exterior chases on older cabins are often steep to reach, and snow or ice may delay work for days. We quote a flat price before we start, so the number we give you is the number you pay.
Neighborhoods We Serve in Running Springs
We cover all of ZIP code 92382, including the upper and lower areas of town, the stretches along Highway 18, and the cabin clusters near Keller Peak and Arrowbear Lake. Response time for inspections in Running Springs typically runs one to three days depending on weather and road access.
- Running Springs town center
- Arrowbear Lake
- Keller Peak area
- Smiley Park
- Highway 18 corridor east of Rim of the World
Service Area – Cities Near Running Springs
While this page covers Running Springs, our crews also serve homes just down the mountain. That includes Lake Arrowhead, CA, Crestline, CA, Highland, CA, and Mentone, CA. Mountain work has its own schedule and access constraints, so call us ahead of the burn season to reserve a slot.
Serving Running Springs, CA — Our Local Coverage Area
We’re based in the Running Springs area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Running Springs
Yes, though snow can delay on-site work for a day or two during heavy storms. Summer and early fall are the easiest windows for inspections, but we book cleanings and repairs all year. Call us to schedule before the burn season starts.
Most standard repairs, like cap replacement or crown resurfacing, do not. Larger structural changes or liner swaps may require county approval through San Bernardino. We can tell you which jobs need paperwork and what to expect.
Yes. We check for animal nests, snow damage at the cap and crown, and creosote that has hardened during the off-season. Vacant cabins are where we find the most serious blockages, so do not light a fire before an inspection.
If your chimney needs a sweep or repair in Running Springs, call (866) 520-4943. We will tell you what is there, show you the proof, and fix what needs fixing. Free estimates for all repair work.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Running Springs Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
— Carmen Garcia"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
— Gabriela Torres"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
— Robert Sullivan