Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Phelan, CA
Chimney repair in Phelan usually means one of three things: a rusted-out metal flue on an older manufactured home, a cracked crown on a site-built masonry chimney, or flashing that’s given up after years of High Desert wind. Firebrick Chimney Sweep has served Phelan since 2012, and the work here is different from down the hill. Cold winters push wood stoves hard, Santa Ana winds scour exposed metal, and summer fire season means a damaged spark arrestor isn’t a cosmetic issue. Call (866) 520-4943 when you need a chimney company that repairs what it finds, not one that sweeps and refers you elsewhere.
Why Phelan Homes Are Different
Phelan sits at roughly 4,000 feet on the north slope of the San Gabriels, and that elevation drives everything about chimney work here. The wood-burning season runs long – it’s not unusual to light a stove in October and keep feeding it into April, sometimes May. Homes burn hard and accumulate creosote faster than coastal fireplaces that get used twelve nights a year. The housing stock itself is mixed: manufactured homes on permanent foundations alongside ranch-style and custom builds, many of them decades old, many of them with wood stoves or fireplace inserts vented through metal flues that were questionable when installed and have only aged since. We routinely see improvised DIY installations – off-grid setups, homeowner-fabricated flashing, clearance-to-combustibles violations nobody caught because the home changed hands without an inspection. Gravel driveways and long setbacks mean access gets planned around weather and truck positioning, not just the sweep itself. And the dry wind that makes Phelan a wildfire-risk zone also dries out mortar joints and crown sealant faster than coastal air ever will.
Styles & brands we work with
Our Main Phelan Services
Most Phelan homeowners call us first about two things: a chimney that hasn’t been swept in years, and a dryer vent they suspect is packed with lint. Both are combustion-ventilation problems, and both are fire hazards when ignored.
Chimney Sweep in Phelan
A sweep in Phelan is the starting point for every wood-burning system out here, and it’s more involved than a quick brush-up. We remove creosote from stoves, inserts, and open fireplaces, check the flue for cracks or separation, and look at what’s happening at the cap and spark arrestor – because in this wind corridor, spark screens matter. Many homes burn pine and juniper cut locally, which loads creosote faster than seasoned oak. Chimney Sweep in Phelan
Dryer Vent Cleaning in Phelan
Lint builds the same way creosote does: slowly, invisibly, and then all at once it’s a fire hazard. Rural homes in Phelan often have longer dryer vent runs than suburban houses, and longer runs mean more surface area for lint to accumulate. Manufactured homes add another layer, with flex ducting that kinks and traps debris. Dryer Vent Cleaning in Phelan
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Phelan
Chimney repair in Phelan tends to cluster around two failure points. The first is metal: older manufactured homes and ranch builds from the 1970s through the 1990s often vent wood stoves through single-wall or thin-gauge flue pipe that corrodes from the inside out, especially when creosote sits in the pipe during humid months. The second is masonry: freeze-thaw cycles at 4,000 feet crack crowns and mortar joints, and once water gets in, every subsequent winter expands the damage. We handle both. For the full scope of what we repair, see Chimney Repair.
Chimney Cap Installation
Signs you need it
Rain or snow getting into the firebox, birds or rodents in the flue, or an open flue pipe with no termination at all.
What it costs in Phelan
Chimney cap installation in Phelan typically runs $150 to $500 including the cap and fastening hardware.
How we do it
We measure the flue opening, match the cap to the termination type, and mechanically fasten it so Santa Ana winds won’t strip it off the crown.
Chimney Cap Replacement
Signs you need it
A cap that’s rusted through, missing its spark arrestor, or blown off entirely during a wind event.
What it costs in Phelan
Cap replacement in Phelan usually runs $200 to $600 depending on flue size and whether we need to rebuild the anchor points.
How we do it
We remove the old cap, inspect the exposed flue tile, repair anchor screws if the old holes are wallowed out, and install a new cap rated for the flue diameter.
Chimney Liner Installation
Signs you need it
Cracked clay tiles, a flue that won’t hold a pressure test, or a wood stove venting through a corroded metal liner on an older manufactured home.
What it costs in Phelan
Chimney liner installation in Phelan most often falls between $1,000 and $3,800 depending on liner length, diameter, and access.
How we do it
We size the liner to the appliance, run it through the existing flue, and connect it to the stove or insert with proper termination – often using DuraFlex components.
Chimney Flashing Repair
Signs you need it
Water staining on ceilings near the chimney, damp drywall in the chase, or visible gaps between flashing and the roofline.
What it costs in Phelan
Flashing repair in Phelan generally runs $300 to $900 for a two-step repair on a standard pitched roof.
How we do it
We cut back the old flashing, inspect the roof decking underneath, and install new step and counter flashing sealed against the masonry.
Chimney Crown Repair
Signs you need it
Cracks in the crown that hold water, spalling masonry at the top of the chimney, or a completely deteriorated crown that’s letting water run down the flue.
What it costs in Phelan
Crown repair in Phelan typically costs $350 to $850 depending on crown size and the extent of overlay or rebuild required.
How we do it
We grind back the deteriorated surface, install a bond coat, and re-form the crown with a proper drip edge so water runs away from the flue, not into it.
What Chimney Repair Costs in Phelan
| Item | Typical range in Phelan |
|---|---|
| Chimney cap installation | $150 – $500 |
| Chimney liner installation | $1,000 – $3,800 |
| Chimney flashing repair | $300 – $900 |
Do I really need a new liner, or can it wait?
If the flue has visible cracks, failed a level 2 camera inspection, or is a metal liner that’s rusted through, it can’t wait. A compromised liner lets heat and combustion gases reach combustible framing. That’s a house fire waiting on the right conditions.
How long does a chimney repair take in Phelan?
Most cap, flashing, and crown repairs are done in a single trip. Liner work typically takes a full day. Weather matters here – high wind can pause roof work, so we schedule around the forecast, not just the calendar.
Brands We Service in Phelan
We work with professional-grade chimney products, not hardware-store substitutes. That means HeatShield ceramic resurfacing for deteriorated flues, Gelco caps, and Olympia Chimney components. See our brands for the full list. Parts are ordered to the job, which keeps turnaround tight even for homes on the east side of Phelan.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Phelan, CA
| Service | Typical range in Phelan |
|---|---|
| Chimney sweep | $180 – $350 |
| Chimney cap installation | $150 – $500 |
| Chimney cap replacement | $200 – $600 |
| Chimney liner installation | $1,000 – $3,800 |
| Chimney flashing repair | $300 – $900 |
| Chimney crown repair | $350 – $850 |
| Dryer vent cleaning | $120 – $250 |
| Dryer vent replacement | $150 – $400 |
What pushes price up in Phelan is usually access – long gravel driveways, steep roof pitches on custom builds, or a stove that requires scaffolding to reach the cap safely. But we give you a firm price before work starts, and we don’t bolt on charges mid-job when you’ve already approved the scope.
Neighborhoods We Serve in Phelan
We cover all of Phelan from the 92329 and 92371 ZIP codes out to the edges of the valley. Homes are spread out here, so we batch routes by quadrant to keep response times reasonable without charging for a separate service call from down the hill.
- Phelan proper and the commercial corridor along Phelan Road
- Pinon Hills-adjacent parcels on the west side of town
- Oak Hills-adjacent acreage on the north edge
- Sheep Creek Road and the surrounding ranches
- Baldy Mesa and the south-facing lots near the forest boundary
Service Area – Cities Near Phelan
Firebrick Chimney Sweep works throughout the High Desert, which means the same crews and the same equipment serve neighboring communities without you needing a different contractor. We also handle jobs in Piñon Hills, CA, Wrightwood, CA, Oak Hills, CA, and Hesperia, CA.
Serving Phelan, CA — Our Local Coverage Area
We’re based in the Phelan area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Phelan
We schedule most Phelan work within a week of your call, sooner if it’s an inspection tied to a real estate transaction or an insurance demand. Because we batch High Desert routes, we can usually give you a firm date at the time of the call, not a floating window.
Most chimney sweeps and cap replacements don’t require a permit. Liner installation and masonry rebuilds sometimes do, depending on the scope and the fire district. We’ll tell you if your job crosses into permit territory and file the paperwork, but most Phelan repairs fall under routine maintenance.
Yes, and that’s a significant part of our Phelan work. Manufactured homes here often vent wood stoves through metal flues that were never great to begin with. We inspect those systems against the original listing and correct issues ranging from improper clearance to corroded liner sections.
Call (866) 520-4943 for a free estimate on any chimney or dryer vent work in Phelan. We’ll give you a straight answer on scope and price, and if something can safely wait, we’ll tell you that too.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Phelan Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
— Scott Ziegler"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
— Carmen Garcia"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
— Gabriela Torres