Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Jurupa Valley, CA
Chimney repair in Jurupa Valley usually means addressing cracked clay-tile flues and failing mortar crowns on 1970s and 1980s ranch-style homes. We handle everything from a loose chimney cap to a full stainless liner replacement, and most repairs in the 91752 ZIP come down to two things: decades of heating cycles and long, hot summers that bake the masonry. Firebrick Chimney Sweep has served Jurupa Valley since 2012. Call (866) 520-4943 when an inspection turns up something that needs fixing.
Why Jurupa Valley Homes Are Different
Jurupa Valley’s housing stock skews heavily toward tract homes built between the 1970s and 1990s, and a lot of those fireplaces have original clay-tile flues that were never meant to handle forty years of heat cycling. Clay tiles crack. When they do, the gap lets heat and gases reach the masonry around the flue, and that’s when a simple sweep turns into a repair conversation. The hot, dry summers compound the problem: fireplaces sit unused for months, creosote left from the previous winter hardens into a glaze that’s more difficult to remove, and pest nests can block the flue entirely. Then Santa Ana winds arrive and drive debris, dust, and the occasional ember straight down an uncapped chimney.
In the Mira Loma area, the fuel source changes the work. A lot of homeowners burn softwoods and construction scraps, which produce creosote much faster than seasoned oak or manufactured logs. We regularly find glaze-stage creosote in Mira Loma chimneys that requires chemical treatment before a standard mechanical sweep will do anything. That’s not a scare tactic; it’s what the deposits look like when we drop a camera down the flue. The good news is that most Jurupa Valley fireplaces are structurally sound underneath the buildup, and the right repair at the right time keeps them that way.
Styles & brands we work with
Our Main Jurupa Valley Services
Most Jurupa Valley homeowners call us for one of two reasons: a fireplace that hasn’t been cleaned in years and needs a real sweep, or a dryer vent that’s never been opened since the house was built. Both are ventilation fire hazards, and both are things we handle start to finish.
Chimney Sweep in Jurupa Valley
A sweep in Jurupa Valley starts with the same camera inspection whether the fireplace has been used once or every winter for three decades. Older 91752 homes often have flues that were built before current clearance standards, so we check the throat, the smoke shelf, and the full liner run before any brush touches the wall. Mira Loma properties that burn scrap wood get special attention because the creosote there is heavier and stickier. If the flue is in safe shape, we sweep it and leave a photo report showing the before and after. Chimney Sweep in Jurupa Valley covers the full process, pricing, and what to expect.
Dryer Vent Cleaning in Jurupa Valley
Dryer vents in Jurupa Valley tract homes are often long, vertical runs that climb through an interior wall before exiting at the roofline, which makes them harder to clean and easier to ignore. Lint packs against the pipe walls, airflow drops, and the dryer runs hotter and longer on every cycle. That heat has nowhere to go. We clean the full vent run from the dryer connection to the exterior termination and report what we find, including disconnected joints or damaged ducting. Dryer Vent Cleaning in Jurupa Valley has the service details and local pricing.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Jurupa Valley
When a Jurupa Valley chimney needs repair, the job usually falls into one of a few familiar categories: a cracked clay-tile flue, a rusted or missing cap, a crown that’s crumbled at the edges, or flashing that’s pulling away from the roofline. Homes built in the 91752 ZIP before modern building codes often have flues made of sectional clay tile, and those tiles break down after enough heating and cooling cycles. We repair what’s broken and tell you plainly when something can wait. Chimney Repair covers the full scope of what we fix, and we stock professional-grade components rather than ordering piecemeal from a hardware shelf.
Chimney Cap Installation
Signs you need it
You can see daylight or debris falling into the fireplace, or there is rust staining on the chase top where an old cap has corroded through.
What it costs in Jurupa Valley
Chimney cap installation in Jurupa Valley typically runs $250 to $600 depending on the flue size and whether a custom stainless or copper cap is needed.
How we do it
We measure the flue tile dimensions, install a stainless steel or copper cap sized for the flue, and secure it with mechanical fasteners rated for the wind exposure a Jurupa Valley roofline gets during Santa Ana events.
Chimney Cap Replacement
Signs you need it
The existing cap is rusted through, bent, or so clogged with creosote and nesting material that airflow is visibly restricted at the top of the flue.
What it costs in Jurupa Valley
Replacing an old cap in Jurupa Valley typically falls between $250 and $600, with the final number driven by flue size and whether the mounting bracket needs rebuilding.
How we do it
We remove the existing cap, inspect the flue tile underneath for cracks that may have started the problem, then install a new cap with the right clearances for proper draft.
Chimney Flashing Repair
Signs you need it
Water stains appear on the ceiling near the chimney after rain, or you can see gaps and lifted metal where the flashing meets the roofline.
What it costs in Jurupa Valley
Flashing repair in Jurupa Valley is priced by the job, with most fixes in the $250 to $550 range when the flashing can be re-secured and resealed rather than fully replaced.
How we do it
We remove the old sealant, inspect the step and counter flashing for tears, replace damaged sections, and reseal with a high-temperature roofing compound that stays flexible through the valley’s hot summers.
Chimney Crown Repair
Signs you need it
The concrete slab at the top of the chimney has visible cracks, spalling, or missing chunks along the edges, or water is seeping into the firebox after storms.
What it costs in Jurupa Valley
Crown repair in Jurupa Valley generally runs $450 to $900, with full rebuilds at the higher end when the existing concrete has crumbled past the point of patching.
How we do it
We grind out the cracked sections, apply a flexible sealant or recast the crown with the proper overhang and drip edge, and make sure water sheds away from the flue instead of soaking into the masonry.
What Chimney Repair Costs in Jurupa Valley
| Item | Typical range in Jurupa Valley |
|---|---|
| Chimney cap installation | $250 – $600 |
| Chimney cap replacement | $250 – $600 |
| Chimney flashing repair | $250 – $550 |
| Chimney crown repair | $450 – $900 |
How much does chimney repair cost in Jurupa Valley?
Most repairs in Jurupa Valley land between $250 and $900 depending on what’s broken. A simple cap replacement is at the low end; a crumbled crown rebuild runs higher. We quote a flat price before any work begins, so there are no add-ons after the fact.
Do I really need a new liner, or can the old one be repaired?
It depends on the damage. Hairline cracks can sometimes be addressed with HeatShield ceramic resurfacing, which restores the flue surface without a full relining. Wide cracks, missing tile sections, or flue offsets usually require a new liner. We only recommend what the camera inspection shows.
Brands We Service in Jurupa Valley
We work with professional-grade chimney products from HeatShield, Gelco, Olympia Chimney, and Copperfield. That means parts are spec’d for the actual flue dimensions and fuel type, not whatever is on a hardware store shelf. Most common components are stocked and ready, which keeps Jurupa Valley repair timelines short. See our brands for the full list of what we install and why.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Jurupa Valley, CA
| Service | Typical range in Jurupa Valley |
|---|---|
| Chimney sweep | $189 – $329 |
| Chimney cap installation | $250 – $600 |
| Chimney cap replacement | $250 – $600 |
| Chimney flashing repair | $250 – $550 |
| Chimney crown repair | $450 – $900 |
| Chimney liner installation | $2,500 – $5,500 |
| Dryer vent cleaning | $119 – $209 |
What pushes a Jurupa Valley quote higher is usually the condition of the flue when we get the camera in. Glaze-stage creosote in Mira Loma adds a chemical treatment step to the sweep. Crumbled crowns and rusted chase tops push repair numbers toward the top of a range. We give you a flat price before any work begins, so the number on the quote is the number on the invoice.
Neighborhoods We Serve in Jurupa Valley
We cover the entire 91752 ZIP and the surrounding Jurupa Valley communities, from older ranch tracts to newer subdivisions. Response time across the valley is consistent because our crews route through the area’s main corridors.
- Mira Loma
- Indian Hills
- Pedley
- Sunnyslope
- Glen Avon
Service Area – Cities Near Jurupa Valley
Firebrick Chimney Sweep works throughout the northwestern Inland Empire, including Glen Avon, CA, Pedley, CA, and Sunnyslope, CA to the south and west. We also serve Eastvale, CA for homes that sit right on the valley’s eastern edge. If you’re within a short drive of Jurupa Valley, we can likely get to you on the same schedule.
Serving Jurupa Valley, CA — Our Local Coverage Area
We’re based in the Jurupa Valley area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Jurupa Valley
Routine sweeps, cap installations, and most flashing and crown repairs do not require a permit in Jurupa Valley. Structural rebuilds or full fireplace replacements may, depending on scope. We’ll tell you during the estimate if your job crosses that line, and we handle the paperwork when it does. Call (866) 520-4943 and we’ll sort it out.
Most Jurupa Valley appointments are scheduled within a week, and repair follow-ups move faster once we’ve already inspected the chimney. Sweeps take an hour or two. Repairs depend on parts, but common caps and flashing components are stocked locally. Call (866) 520-4943 for the next open slot.
Yes. Some Jurupa Valley HOAs require specific cap styles or restrict visible exterior changes. We’ve worked within those rules across the valley and can match the required materials. Bring the HOA’s written requirement to the estimate and we’ll quote to spec.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Jurupa Valley Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
— Carmen Garcia"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
— Gabriela Torres"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
— Robert Sullivan