Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Highgrove, CA
Chimney repair in Highgrove usually means one of two things: a flue that’s been sitting untouched through a long, hot Riverside County summer and is now packed with debris, or an older masonry chimney that’s starting to show its age at the crown, flashing, or liner. Most homes here are single-story ranch and Spanish-style stucco builds from the 1950s through the 1980s, which means clay flue tiles, exterior stucco stacks, and dampers that have seen decades of stop-start use. Firebrick Chimney Sweep has served Highgrove since 2012. If you need a chimney looked at before burning season, call (866) 520-4943 and we’ll get it diagnosed properly.
Why Highgrove Homes Are Different
Highgrove sits in a hot, dry inland climate where wood fires are more of a holiday ritual than a winter heating strategy. That changes the kind of chimney problems we find. A chimney that sits idle for eight or nine months doesn’t wear out from overuse; it collects. Soot and light creosote accumulate from the last fire of the previous season. Leaves from the older tree cover in this part of Riverside County drop into uncapped flues. Birds and rodents move in, build nests, and block the passage entirely. Then the first cold snap hits, somebody lights a fire, and a flue that hasn’t been inspected since spring has to move smoke past a season’s worth of accumulated debris.
The housing stock compounds this. Many Highgrove chimneys are original to homes built forty to seventy years ago. Clay flue tiles were standard then, and they crack under thermal stress and time. Exterior stucco stacks on Spanish-style builds absorb the dry summer heat and then contract quickly when a fire heats them from the inside, which widens tiny mortar cracks year after year. Dampers get stiff, rain caps corrode, and crowns delaminate. None of this comes from burning too much; it comes from time, heat cycling, and long idle stretches. We approach every Highgrove inspection with that in mind: the chimney hasn’t worked too hard. It’s been sitting still, and sitting still creates its own set of problems.
Styles & brands we work with
Our Main Highgrove Services
Most Highgrove homeowners call us for one of two reasons. Here’s what each involves in this area.
Chimney Sweep in Highgrove
A sweep in Highgrove is rarely about removing thick creosote from a heavily used fireplace. It’s about clearing out what accumulated while the chimney sat unused: soot, leaf debris, animal nests, and whatever else the long dry season dropped into the flue. We see bird and rodent nests in Highgrove flues more than almost any other find, because chimneys here sit idle for months at a stretch. The sweep itself is straightforward, but we treat it as an inspection too. Every sweep includes a look at the liner, the damper, the crown, and the flashing. That’s how a routine cleaning becomes a repair caught early. Read more on the dedicated page: Chimney Sweep in Highgrove.
Dryer Vent Cleaning in Highgrove
Chimneys and dryer vents share the same core risk: restricted, dirty ventilation that becomes a fire. In Highgrove’s dry air, lint builds up fast inside dryer ducts, and a clogged vent makes the dryer run hotter and longer. We clean dryer vents as part of our full ventilation focus, and we recommend it to every household that burns wood. A chimney that’s clean doesn’t reduce the risk of a dryer vent fire. The two should be on the same schedule. See the full breakdown at Dryer Vent Cleaning in Highgrove.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Highgrove
Highgrove’s older ranch homes and Spanish-style stucco builds share a common chimney profile: clay flue tiles, exterior stucco stacks, and original dampers that have outlived their design life. After decades of hot summers, occasional winter fires, and long idle stretches, the crown cracks, the flashing begins to separate from the roofline, and the liner shows its age. Chimney repair in Highgrove is usually about catching those failures before they turn into water leaks or fire hazards. That’s the core of what we do at Chimney Repair, and Firebrick handles it without sending you to a mason or a materials supplier separately.
Chimney Cap Installation
Signs you need it
You see birds, squirrels, or nesting material near the chimney, or rainwater is getting into the firebox after storms.
What it costs in Highgrove
Chimney cap installation in Highgrove typically runs from $145 to $350 depending on the flue size and whether a custom fit is needed.
How we do it
We measure the flue, choose the correct cap for the clay tile or metal liner, and secure it to code so it stays put through Highgrove’s high winds.
Chimney Cap Replacement
Signs you need it
The existing cap is rusted, bent, or missing sections, or you’re clearing nests from the flue every year.
What it costs in Highgrove
Replacing a chimney cap in Highgrove generally costs between $150 and $350, which includes removing the old cap and fitting the new one.
How we do it
We pull the old cap, inspect the flue for the damage that let moisture or animals in, and install a properly sized replacement using stainless or copper components.
Chimney Liner Installation
Signs you need it
An inspection shows cracked clay tiles, missing mortar joints, or you smell smoke in the house even when the fireplace isn’t in use.
What it costs in Highgrove
Chimney liner installation in Highgrove typically costs between $950 and $2,200, depending on the type and length of the liner.
How we do it
We evaluate the flue dimensions, recommend a professional-grade liner from the brands we stock, and install it as a continuous run with proper termination at the top.
Chimney Flashing Repair
Signs you need it
You see water staining on the ceiling near the chimney, or the flashing is pulling away from the brick and roofline.
What it costs in Highgrove
Chimney flashing repair in Highgrove generally runs from $300 to $700, depending on how much of the flashing needs to be replaced.
How we do it
We remove the damaged flashing, replace the section with proper metal, and seal the transition between chimney and roof so water cannot find a path back in.
Chimney Crown Repair
Signs you need it
The crown is cracked, spalling, or has visible gaps where water can soak into the masonry below.
What it costs in Highgrove
Chimney crown repair in Highgrove typically costs between $450 and $950, depending on whether the crown needs patching or a full resurfacing.
How we do it
We remove the damaged material, rebuild the crown with proper slope so water sheds away from the flue, and seal it against Highgrove’s dry heat and occasional heavy rain.
What Chimney Repair Costs in Highgrove
| Item | Typical range in Highgrove |
|---|---|
| Chimney cap installation | $145 – $350 |
| Chimney liner installation | $950 – $2,200 |
| Chimney flashing repair | $300 – $700 |
Do I need a chimney liner in Highgrove if my fireplace is rarely used?
If the clay flue tiles are cracked or the mortar joints are failing, the liner is compromised regardless of how often you burn. A damaged flue can leak combustion gases into the house and should be repaired before any fire, even one fire a year. Call (866) 520-4943 for an evaluation.
Can you fix a leaking chimney in Highgrove the same season you find it?
Yes. We stock common flashing materials, caps, and sealants, and we schedule repairs around Highgrove’s short burning season so you aren’t waiting weeks. Flashing and crown work are usually completed in a single visit. Call (866) 520-4943 to get on the schedule.
Brands We Service in Highgrove
We work exclusively with professional-grade chimney materials: Gelco caps and dampers, Olympia Chimney components, Famco ventilation parts, and Copperfield flashing and chase covers. We stock common parts for Highgrove’s older clay-tile chimneys, which means many repairs are done same visit. More on inventory at our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Highgrove, CA
| Service | Typical range in Highgrove |
|---|---|
| Chimney sweep | $149 – $249 |
| Dryer vent cleaning | $99 – $179 |
| Chimney cap installation | $145 – $350 |
| Chimney cap replacement | $150 – $350 |
| Chimney liner installation | $950 – $2,200 |
| Chimney flashing repair | $300 – $700 |
| Chimney crown repair | $450 – $950 |
| Animal nest removal | $100 – $250 |
Two things push chimney repair prices up in Highgrove: access and condition. A chimney on a steep tile roof with limited ladder placement takes more time and safety equipment than one on a low-pitch roof. And a chimney that has gone decades without a crown or flashing repair usually needs more than a patch once we get up there. That’s why we give you a flat price before work starts. No surprises after the fact.
Neighborhoods We Serve in Highgrove
We work across the 92313 ZIP and the neighborhoods around it, including the older ranch-home streets near Iowa Avenue, the stucco subdivisions along Center Street, the larger-lot properties toward Box Springs, and the streets bordering UCR. Response time in Highgrove is typically within a day or two for quotes, and a bit sooner for sweep-only jobs.
- Homes near Iowa Avenue
- Neighborhoods along Center Street
- Larger-lot properties toward Box Springs
- Streets bordering the UCR area
- The Spanish-style stucco subdivisions off Barton Street
Service Area – Cities Near Highgrove
We also serve the surrounding Riverside County communities. If you’re in Grand Terrace, CA, Colton, CA, Loma Linda, CA, or Rubidoux, CA, the same team and the same professional-grade materials apply. Chimney and dryer vent work in those areas follows the same inland climate pattern we see in Highgrove: long idle periods, then a short burst of use when temperatures drop.
Serving Highgrove, CA — Our Local Coverage Area
We’re based in the Highgrove area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Highgrove
Most chimney sweeps, cap installations, and flashing repairs don’t require a permit in an unincorporated Riverside County community like Highgrove. Liner replacements and structural rebuilds can trigger permit requirements depending on scope. We’ll tell you if your job needs one before we start. Call (866) 520-4943 to ask about your specific situation.
We keep our Highgrove scheduling open going into the fall because we know the first cold week is when everyone calls. Sweep-only visits are typically scheduled within a few days, and we batch Highgrove appointments by neighborhood to keep response times short. Call (866) 520-4943 and we’ll get you on the board.
That’s the right question to ask before lighting anything. A chimney that has sat idle for multiple seasons in Highgrove’s dry climate likely has debris, animal activity, or cracked clay tiles that need evaluation. We inspect before we sweep, and we show you what we find before we recommend any repair. Call (866) 520-4943 for a free estimate and an honest read on the condition of your chimney.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Highgrove Customers Say
"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
— David Wong"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
— Chris Parker"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
— Luis Hernandez