Gas fireplace service
Sweep & inspection
Caps & crowns
Flue relining
Masonry repairLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with





See the difference
Before
After
Before
After
Before
AfterHow Much Does Fireplace Services Cost in Hollywood?
Fireplace services in Hollywood typically run $150 to $425 for a standard chimney sweep and inspection, $250 to $600 for a dryer vent cleaning combined with fireplace work, and $800 to $4,500+ for structural repairs like liner restoration or masonry rebuilds. The final number depends on your fireplace type, the condition of the flue, and whether the job needs just a sweep or actual repair. A certified inspection tells you which category you’re in.
Hollywood homes sit in a particular spot when it comes to fireplace costs. Many of the bungalows, Spanish Colonial revivals, and courtyard apartments between Franklin and Melrose were built between 1915 and 1940, which means original brick chimneys, aging mortar joints, and flues that have had a century of Los Angeles basin air, Santa Ana wind events, and seismic movement working on them. That history shapes what a real estimate looks like here. We’ll give you the honest numbers.
Key Takeaways
- A basic sweep and Level 1 inspection in Hollywood runs $150 to $425.
- HeatShield ceramic resurfacing, which restores a deteriorating flue liner without a full reline, usually costs $1,200 to $2,400.
- Full stainless liner installation with a DuraFlex or Olympia Chimney system runs $2,800 to $6,500 depending on flue height and shape.
- Masonry repair and crown work on older Hollywood chimneys starts around $800 and climbs with height and access.
- Dryer vent cleaning on its own costs $150 to $250.
- Every estimate we give is free and comes with an honest diagnosis, not a sales pitch.
Fireplace Services Cost Breakdown (2026)
Here’s how the numbers break out for the Hollywood market. These ranges reflect what we actually quote for homes in the 90027, 90028, 90038, and 90046 ZIP codes. Longer flues, tile-lined chimneys that need re-lining, and second-story rooftops push toward the upper end.
| Service | Typical Price Range (Hollywood) | What It Covers |
|---|---|---|
| Chimney sweep + Level 1 inspection | $150 – $425 | Creosote removal, visible flue and firebox check, draft test |
| Level 2 video inspection | $250 – $550 | Camera inspection of the flue liner, joints, and smoke chamber |
| Dryer vent cleaning | $150 – $250 | Full-length duct cleaning, lint removal, airflow check |
| Fireplace sweep + dryer vent combo | $250 – $600 | Both services on one visit |
| HeatShield ceramic flue resurfacing | $1,200 – $2,400 | Restoring a cracked or spalling flue liner in place |
| Stainless steel liner installation (DuraFlex or Olympia Chimney) | $2,800 – $6,500 | Full reline, insulation, cap, and top plate |
| Masonry repointing and tuckpointing | $900 – $2,800 | Mortar joint repair on brick chimneys |
| Chimney crown rebuild | $800 – $2,200 | Crown replacement with proper slope to shed water |
| Firebox rebuild or firebrick replacement | $1,400 – $4,000 | Rebuilding interior firebox walls with firebrick and refractory mortar |
| Damper replacement | $350 – $900 | Top-seal or throat damper installation |
| Chimney cap installation (Copperfield or Famco) | $250 – $650 | Cap, screen, and animal guard |
| Full chimney rebuild (upper section) | $4,500 – $12,000+ | Rebuild from roofline up, new liner, crown, and flashing |
The biggest cost driver in Hollywood isn’t square footage or labor rates. It’s condition. A 1930s bungalow off Yucca Street with intact original mortar needs nothing more than a sweep and inspection. The same age house three blocks over, one that sat through 40 years of deferred maintenance, may need an $800 crown rebuild before a sweep is even meaningful. We tell homeowners which of those they’re looking at, in writing, before any work starts.
What Affects Fireplace Services Pricing in Hollywood
Pricing here isn’t arbitrary. Five things move the number up or down more than anything else, and most of them are specific to the housing stock and climate along Hollywood’s streets.
- Chimney age and the era it was built. Homes built before 1945 in Hollywood and nearby Los Feliz, Franklin Village, and Whitley Heights generally have brick chimneys laid with lime mortar, which softens and powders faster than modern Portland cement. Re-pointing a 90-year-old chimney costs more than re-pointing a 30-year-old one because the joints need more careful prep.
- Flue condition and liner type. A clay-tile flue with visible cracks changes the whole estimate. HeatShield resurfacing runs about half of a full reline, so diagnosing correctly saves real money. We check with a camera in a Level 2 inspection before recommending anything.
- Rooftop access and height. Hollywood has plenty of steep pitched roofs, courtyard apartment buildings with shared chimneys, and hillside homes above the Boulevard with tricky ladder access. A chimney that requires extra staging or a taller ladder adds labor.
- Seismic and settlement history. Buildings along the Hollywood fault zone and older masonry on Melrose have settled, cracked, and shifted over the years. Cracked crowns, separated flue tiles, and offset chimney stacks are common. Repairing those costs more than cleaning.
- Fireplace type. A wood-burning masonry fireplace with a firebox on the first floor is the cheapest to service. A gas insert, a prefabricated zero-clearance unit, or a multi-story flue with a smoke chamber offset needs more time and sometimes specialized parts.
- Dryer vent length and accessibility. Short duct runs from the laundry room to an exterior wall cost less to clean than long, semi-rigid runs through a crawl space or an upstairs hallway. Long runs that have never been cleaned cost more because they take longer and often reveal crushed sections.
One factor worth flagging for anyone flagged by a home inspector, insurance carrier, or fire marshal: those reports usually mean a repair is required, not just a cleaning. We see this often in Hollywood duplexes and small apartment buildings where a buyer’s inspection found a cracked crown or a separated liner. In those cases, we can diagnose and repair in the same engagement – no second contractor, no referral. That’s not just a service convenience; it often reduces the total cost of getting the property cleared.
How to Save on Fireplace Services
Saving money on fireplace work isn’t about finding the lowest bid. In our experience, the cheapest quote in Hollywood often turns into the most expensive job six months later because the liner was “inspected” from the ground and the crown wasn’t touched. Here’s what actually saves money:
- Catch liner problems early. A single HeatShield resurfacing at $1,200 is cheaper than a full liner replacement at $3,500 that a delayed inspection would have required. A $250 video inspection is the best money you’ll spend on a chimney.
- Combine services. Booking a chimney sweep and a dryer vent cleaning on the same visit saves the trip charge and cuts the combined bill by $50 to $100 versus two separate visits.
- Schedule in spring or early summer. Fireplace work slows down in Hollywood from April through July. Getting an estimate during that window sometimes means more scheduling flexibility, and it gets repairs done before the first cool night in October when everyone remembers their chimney at once.
- Ask what’s actually failing. A good technician will point to the specific cracked tile, the spalled mortar, or the crown gap. Get the diagnosis in writing so you know what you’re paying for and why.
- Get a free estimate before scheduling any work. We don’t charge for estimates, and we’ll tell you if you need just a sweep and nothing else. Call us at (866) 520-4943 and we’ll book a time.
- Keep up with annual sweeping. A yearly sweep prevents the kind of creosote buildup that leads to a chimney fire, and chimney fires are the single most expensive “repair” a homeowner can face. Routine sweeping is the original cost-saving measure.
We work with professional-grade materials only – DuraFlex liners, HeatShield ceramic resurfacing, Gelco and Olympia Chimney components, Famco caps, and Copperfield accessories. Consumer-grade substitutes at a big-box store cost less up front but fail faster. If a chimney needs repair, the material used determines whether it lasts 10 years or 40.
What’s Included in a Standard Hollywood Chimney Sweep?
A standard chimney sweep in Hollywood includes creosote removal from the flue and firebox, a Level 1 visual inspection of accessible chimney parts, a draft check, and a written report on what we found. That’s the $150 to $425 service. It is not the same as a Level 2 inspection, which adds a video camera run down the entire flue to spot cracks, gaps, and offsets that a visual check from the damper can’t detect.
If your home was built before 1970, has had a chimney fire, or has a changed fuel source (gas insert added to a wood fireplace, for example), we usually recommend the Level 2 inspection. It costs more, but it’s the only way to find out whether the flue is safe to use. Hollywood’s older housing stock proves this need regularly; in the 1920s bungalows around Whitley Heights and the Hollywood Heights neighborhood above Highland, we routinely find separated clay flue tiles that a visual inspection would miss entirely.
Chimney repair is part of the same visit
When the inspection turns up a problem, we fix it. That’s the difference between a sweep service and a chimney company. A sweep-only operator has to refer you to a mason, who refers you to a liner supplier, who refers you back. We eliminate those handoffs. Our technicians are trained on structural repair as well as cleaning, and the brands we use (DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, Copperfield) are the ones certified professionals specify, not consumer substitutes. See our full range of Fireplace Services in Hollywood for what we handle.
For a broader look at how we approach chimney systems, you can start at our home page.
Frequently Asked Questions About Fireplace Services Cost in Hollywood
How much does a chimney sweep cost in Hollywood?
A basic chimney sweep in Hollywood costs $150 to $425, with the average around $275. That includes creosote removal, a Level 1 inspection, and a written report. Older homes on long flues or with heavy creosote buildup run toward the upper end. Call (866) 520-4943 for an exact quote – estimates are free.
Is HeatShield cheaper than a full chimney reline?
Yes. HeatShield ceramic resurfacing typically costs $1,200 to $2,400, roughly half the cost of a full stainless liner replacement, which runs $2,800 to $6,500. HeatShield works when the existing flue tiles are mostly intact but the liner surface has cracked or spalled. A camera inspection determines whether HeatShield is appropriate or whether the flue needs a full reline.
Can you clean a dryer vent at the same time as a chimney sweep?
Yes, and combining the two saves money. A chimney sweep plus dryer vent cleaning in Hollywood typically runs $250 to $600 versus $300 to $675 booked separately. Dryer vents are one of the leading causes of residential house fires, so cleaning them on the same visit as a chimney sweep is one of the most cost-effective safety checks a homeowner can schedule. Call (866) 520-4943 to book both.
Why does my fireplace cost more to service than my neighbor’s?
Age and condition are the two biggest factors. A 1930s brick chimney with softened mortar joints and a cracked crown can cost 2x to 4x more to service than a 1990s flue with intact tile liner, even if the chimneys look similar from the street. Two homes on the same Hollywood block can have very different chimney condition depending on what maintenance the previous owners did. A Level 2 inspection tells you exactly what you’re working with.
Is it cheaper to repair or replace a chimney?
Repair is almost always cheaper, and it’s usually the right move. Rebuilding the upper section of a chimney runs $4,500 to $12,000+, while re-pointing, crown work, and liner repair typically land between $800 and $3,500 combined. The exception: if the chimney structure has separated from the house or the entire masonry stack is failing, a rebuild may be the only safe option. We’ll tell you honestly which one applies to your home, and we won’t recommend a rebuild when a repair will do the job.
How often should I get my Hollywood chimney swept?
Once a year if you burn wood regularly, or every two to three years if you use the fireplace occasionally. Hollywood’s dry climate means creosote accumulates faster in some homes than others depending on burn habits and wood moisture. A $275 annual sweep is the cheapest insurance against a chimney fire that could cost tens of thousands of dollars in structural damage.
Get a Free Estimate for Your Hollywood Fireplace
Pricing a fireplace service is a conversation, not a fixed menu. We’ll look at your chimney, tell you exactly what it needs, and quote you a real number – not a range that doubles halfway through the job. Whether you’re dealing with a home inspector’s report, an insurance letter, or simply a chimney that hasn’t been touched in a decade, we’ll give you an honest read on what needs to happen and what it will cost.
Firebrick Chimney Sweep handles the full lifecycle: inspection, sweeping, liner repair, masonry work, and dryer vent cleaning, all under one company. We use professional-grade materials from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield because the material is what outlasts the labor. If you want the chimney done correctly the first time, and you want to know the real price before anyone shows up, call (866) 520-4943 for a free estimate.
Pricing reflects the Hollywood market as of 2026. Firebrick Chimney Sweep offers free estimates – call (866) 520-4943.
What Our Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
— Scott Ziegler"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
— Carmen Garcia"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
— Gabriela Torres