Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Dryer Vent Cleaning Across Venice
Dryer vent cleaning in Venice typically costs $149 – $229 for a standard single-story home, and the real issue here isn’t lint volume, it’s salt air corroding the hood and damper on your exterior wall. Most Venice homes we service are 1920s – 1950s bungalows and beach cottages with short vent runs, but the marine layer means galvanized components fail years faster than they would in Culver City or Ladera Heights. We work throughout 90291 and 90294, from the walk streets to the canals. Call (866) 520-4943 and we’ll get you on the schedule, usually within the week.
Firebrick Chimney Sweep handles dryer vents the same way we handle chimneys: we inspect the entire run, show you what we find, and fix what’s actually failing. Nelson Quijada and our techs have seen enough rusted-through vent hoods on Abbot Kinney bungalows to know exactly what to look for before it becomes a fire hazard or a moisture problem inside your walls.
Why Firebrick Chimney Sweep Is Venice’s Preferred Dryer Vent Cleaning Company
Chimney work is all we do, and that depth shows in every inspection. Dryer vents and chimneys share the same core risk: restricted, dirty ventilation that becomes a fire. We treat both with the same seriousness. Our Dryer Vent Cleaning team brings the same structural understanding to a 4-inch duct that we bring to a masonry flue, because a clogged vent behind a stucco wall is still a combustion problem.
Venice homeowners call us because we actually stock the right parts for coastal exposure. Stainless steel hoods, corrosion-resistant dampers, rigid duct replacements. Not whatever’s on the shelf at the hardware store. We use professional-grade materials that hold up to salt fog, because we’ve replaced enough rusted galvanized components on walk street homes to know the difference.
Response time to Venice is straightforward: we schedule within a week for most jobs, and we show up when we say we will. Nelson Quijada runs a crew that works Venice, Santa Monica, and the surrounding coastal corridor regularly, so we’re not figuring out parking on your block for the first time. We know the tight lots, the single-wall construction, and where dryer vents typically exit on these bungalows.
Styles & brands we work with
Our Dryer Vent Cleaning Services in Venice
Dryer Vent Cleaning
We remove the built-up lint from the entire duct run, from the dryer connection to the exterior termination. On Venice beach cottages, that run is often short, under 10 feet, but the lint here gets packed with salt and moisture that inland ducts never see. We clean the duct, verify airflow at the hood, and tell you if anything else needs attention. Most single-story Venice homes run $149 – $189 for a standard cleaning.
Dryer Vent Hood Replacement
This is the service Venice needs more than almost anywhere else in LA. Galvanized dryer vent hoods on ocean-adjacent homes corrode at the hinge and louver within 3 – 5 years. We replace them with stainless steel models rated for coastal exposure, like Hoodeez, which actually hold up. Replacement with a stainless termination typically runs $89 – $139 for the hood plus installation, depending on wall thickness and accessibility.
Dryer Vent Duct Repair
Behind a lot of Venice bungalow walls, the original vinyl flex duct has been crushed, kinked, or disconnected over decades of remodels. If your dryer takes two cycles to dry towels, or the outside of the wall gets warm during a cycle, the duct is likely compromised. We repair or replace duct runs as needed with rigid metal, which resists crushing and doesn’t sag the way flex does. Repair jobs in Venice generally run $175 – $350 depending on the run length and how much of the old duct has to come out.
Dryer Vent Inspection
If you just bought a place in the 90291 zip code, or your home inspector flagged the dryer vent, we do a focused inspection with a camera. You see the inside of the duct before we recommend anything. Nothing gets replaced without you seeing the evidence. Inspections run $89 – $139, and the fee is credited toward any repair we do the same visit.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Venice
We work with professional-grade chimney and vent components from manufacturers like Olympia Chimney, Copperfield, and Famco, not consumer-grade substitutes from the big-box store. That matters on the coast, where a cheap galvanized hood will fail again in a few seasons. We stock stainless steel terminations and corrosion-resistant dampers specifically for Venice’s salt-air conditions, so we’re not ordering parts and leaving you waiting. When we replace a vent hood on a walk street cottage, it’s the last one you’ll need for a long time.
See the difference
Before
After
Before
After
Before
AfterCommon Dryer Vent Cleaning Problems We See in Venice Homes
- Rusted-through galvanized hoods and dampers. Salt-laden marine air eats the hinge and louver assembly within a few years. The result is a hood that won’t close, letting salt fog and damp air back into the duct, which then clogs the lint.
- Corroded vent flashing on stucco walls. The marine layer seeps behind the flashing and rusts the duct connection where it passes through the wall. You won’t see it from the outside until the stucco starts staining or cracking.
- Crushed vinyl flex duct behind bungalow walls. Decades-old flex gets kinked or disconnected in tight wall cavities. The dryer runs hot, takes forever, and the trapped lint raises fire risk with every cycle.
- Moisture-soaked lint from coastal humidity. Venice’s overnight marine layer adds enough moisture that lint clumps and sticks to the duct walls instead of blowing through. It hardens, narrows the airway, and becomes harder to remove the longer it sits.
Pricing for Dryer Vent Cleaning in Venice, CA
Standard dryer vent cleaning in Venice runs $149 – $229 for most single-story homes and beach cottages. That covers the full duct run, airflow verification at the hood, and a photo report of what we found and did. Duct repairs add $175 – $350 depending on how much runs needs to be replaced. Hood replacement with a stainless steel model runs $89 – $139 for the part and installation. We give you a flat price before we start, and you see camera images before anything gets replaced. Call (866) 520-4943 for an exact quote, estimates are free.
We Also Serve Cities Near Venice
Our team works throughout the coastal corridor and inland from our base in Hollywood. We provide Dryer Vent Cleaning in Venice and serve Santa Monica, Culver City, Ladera Heights, and Century City as well. If you’re a few blocks over in any of those areas, same crew, same pricing, same coastal-corrosion knowledge.
Serving Venice, CA — Our Local Coverage Area
We’re based in the Venice area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Venice
Because salt-laden marine air corrodes the metal components of your vent system, especially the exterior hood and damper. Once those fail, moisture gets into the duct and causes lint to clump and stick instead of blowing through. The result is faster buildup and higher fire risk. Annual cleaning plus stainless steel components is the standard approach for Venice homes. Call (866) 520-4943 and we’ll check yours.
A stainless steel hood with a corrosion-resistant damper is the right call within a mile of the ocean. Galvanized steel fails within a few years here. We stock stainless models rated for coastal exposure, and we’ll show you the difference. If your current hood is galvanized and rusting, replacing it before it fails completely is much cheaper than dealing with the moisture damage it causes. Call (866) 520-4943 for a free estimate.
Not directly, but it’s a sign your whole ventilation system has been taking salt damage. If the chimney crown is spalling, the same marine air has been working on your dryer vent hood, flashing, and duct connections. We check all of it in one visit. Since we’re chimney specialists who also clean dryer vents, you get one inspection that covers everything. Call (866) 520-4943 and we’ll take a look.
Once a year, minimum. If you’re within a few blocks of the beach or on the canals, twice a year is not excessive, because the marine layer is doing more than lint ever could. Most Venice homeowners are better served by an annual inspection with a camera, not just a cleaning, because the corrosion here fails faster than lint builds. Call (866) 520-4943 to schedule.
Yes. When the damper corrodes and stays open, damp salt air flows into the duct every night. Lint absorbs moisture, becomes heavy, and sticks to the duct walls instead of blowing through. A rusted damper is often the reason a Venice dryer vent clogs within months of being cleaned. We replace them with stainless steel dampers, and the problem stops. Call (866) 520-4943 for an exact quote, estimates are free.
Written by Nelson Quijada, Owner at Firebrick Chimney Sweep, serving Venice since our founding from Hollywood.