Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Dryer Vent Cleaning Across Compton
Dryer vent cleaning in Compton costs $149 to $289 for most single-story homes, and we can usually schedule your appointment within a few days. If you’ve noticed clothes taking two cycles to dry or a scorched smell in the laundry room, the vent behind your dryer is likely clogged with lint that should have been removed years ago. The homes here in Compton, most of them built between the 1920s and 1950s, often have the worst venting setups we see anywhere in the Los Angeles basin. Call us at (866) 520-4943 and we’ll tell you honestly whether a cleaning is all you need or whether the duct itself has to go.
Why Firebrick Chimney Sweep Is Compton’s Preferred Dryer Vent Cleaning Company
We work on ventilation systems every day. That’s the whole business. Our crews know what a proper exhaust path looks like on a 1940s stucco bungalow off Rosecrans Avenue, and what it looks like when someone’s been ignoring it for thirty years. The same company that sweeps chimneys in Compton also clears dryer vents, because the failure mode is identical: restricted, dirty ventilation that becomes a fire.
Nelson Quijada built Firebrick Chimney Sweep around a simple idea. We sweep it, we repair it. One company, no referrals. That means when we pull your dryer away from the wall and find the original foil flex duct crushed flat against the studs, we don’t hand you a business card for someone else. We replace the duct, we install the proper metal hood on the exterior, and we confirm the exhaust is actually leaving the house.
Homeowners in Compton call us because they want one company that understands the whole combustion and ventilation picture. Whether you live near Compton College in the 90221 ZIP or off North Long Beach Boulevard in 90221, we bring the same trade-specialized approach. No franchise checklists. No handyman add-on service. Just a full diagnosis, photo documentation, and a fix that lasts.
Styles & brands we work with
Our Dryer Vent Cleaning Services in Compton
Dryer Vent Cleaning and Inspection
The core service is straightforward: we disconnect the dryer, clean the entire vent run from the appliance to the exterior termination point, and inspect every accessible section. In Compton’s older homes, that run is often a long foil flex duct snaking under the house or through an unlined wall cavity. We remove the accumulated lint, verify airflow with a manometer, and show you photos of what we found. If the duct is holding lint in folds and kinks, we’ll tell you directly: cleaning is a temporary fix, and the duct needs replacement.
Dryer Vent Duct Replacement (Rigid Metal Retrofit)
This is the service Compton houses need most often. The original 4-inch foil flex ducts installed in 1940s and 50s bungalows were never meant to last seventy years. They sag, they kink behind the dryer, and they collect lint at every bend. We replace them with smooth 4-inch rigid metal ducting, sealed at every joint, routed the shortest practical path to the exterior. The difference in drying time is immediate. The difference in fire risk is structural.
Exterior Vent Hood and Flapper Replacement
Walk around the outside of a Compton stucco home and you’ll often see a plastic louvered vent hood with a missing flapper. That broken flapper lets dust from the dry, dusty air straight into the vent run, and lets the occasional winter rain collect in the duct. We replace plastic hoods with metal hoods and proper backdraft flappers, sealed against the stucco with a weathertight ring. It’s a small component that makes an outsized difference in how much debris gets into your vent between cleanings.
Trusted Brands We Service in Compton
We stock professional-grade duct components and vent hoods, and we use the same standard for dryer vent retrofits that we use on chimney systems. That means no builder-grade flex foil from a hardware store shelf. We work with HeatShield ceramic resurfacing materials, Olympia Chimney components, and Famco hardware, and we keep common retrofit parts on the truck so a Compton job doesn’t stall waiting on a shipment. When a customer off Alondra Boulevard needs a rigid metal elbow or a new metal hood, we usually have it same day.
See the difference
Before
After
Before
After
Before
AfterCommon Dryer Vent Cleaning Problems We See in Compton Homes
- Original foil flex duct, crushed and packed with lint. In Compton, a dryer vent run is often original to a 1940s – 50s stucco bungalow: a long, crushed 4-inch foil flex duct snaking under the house or through an unlined wall cavity, not the short rigid metal run that modern code assumes. That flexible duct is a lint trap, and because the region barely rains, residents dry laundry year-round and never think about it.
- Plastic exterior hoods with broken flappers. The plastic louvered hoods installed decades ago degrade in the Southern California sun and lose their moving parts. Dust, and the occasional winter rain, blow straight through into the duct.
- Vent runs that terminate in the attic or crawlspace. We see this on older Compton houses where someone replaced a laundry room but never routed the duct to the exterior. Lint and moisture dump under the house, next to the same unlined flue-era masonry that already has clearance issues.
- Bird and rodent activity in unused vent runs. When a vent hood loses its flapper, it’s an open invitation. Nests inside a dryer duct are common on Compton properties where a dryer sat unused for a season or a tenant moved out.
On a 1952 stucco ranch off South Acacia Street in the 90220 flats, a customer called because the dryer was taking two cycles to dry a load and the laundry room smelled scorched. We pulled the dryer out and found the original foil flex duct completely kinked behind the unit and packed with lint, with a plastic louvered hood on the exterior wall that had lost its flapper, letting the occasional winter rain and dust straight into the run. We replaced it with a smooth 4-inch rigid metal duct and a proper metal hood, and the load dried in one cycle again.
Pricing for Dryer Vent Cleaning in Compton, CA
A standard dryer vent cleaning in Compton runs $149 to $229 when the duct is accessible and the run is under about 15 feet. Longer runs, rooftop terminations, or ducts clogged enough to require disassembly push the job to the $229 to $289 range. Retrofitting a foil flex duct to rigid metal runs $280 to $450 depending on run length and access. Adding a metal exterior hood with backdraft flapper runs $60 to $90 installed. We give you the exact number before any work starts, and the estimate is free. Call (866) 520-4943 and we’ll walk you through what your setup likely needs.
We Also Serve Cities Near Compton
We serve Compton and the surrounding South Bay and Gateway Cities, including East Rancho Dominguez, West Rancho Dominguez, Carson, and Gardena. If you’re right on the edge of town, near the 710 or the 91, call us and we’ll schedule you on the same route we run through Compton every week.
Serving Compton, CA — Our Local Coverage Area
We’re based in the Compton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Compton
If the vent is original foil flex duct, it needs replacing. Cleaning a foil duct is a stopgap, because the folds and kinks that collect lint are part of the material itself. On 1950s Compton bungalows, we almost always recommend a rigid metal retrofit. The duct was never up to modern code, and after 60 or 70 years it’s brittle, sagging, and usually packed solid. A cleaning will improve airflow temporarily. Replacement fixes it. Call (866) 520-4943 and we’ll assess yours in person.
Because that’s what was cheapest and standard when the house was built or the dryer was first installed. Plastic hoods were common on Compton homes from the 1950s through the 1980s, and they fail predictably: the flapper breaks off, the plastic sun-bakes and cracks, and the hood stops doing its only job. We replace them with metal hoods with backdraft flappers that seal tight. It’s usually a 20-minute fix on the exterior wall.
Yes, especially if you live in a 1920s – 1950s stucco bungalow with an original duct run. The problem builds silently. Lint packs the duct from the inside, and because Compton barely rains, there’s no seasonal moisture to signal anything is wrong. You won’t see a leak. You’ll just notice the dryer running longer, and by then the duct is usually far past due. An annual or every-other-year cleaning on an older home is cheap insurance against a fire that starts inside a wall cavity.
Yes. We’re a chimney company that also handles dryer vents, not the other way around. If your Compton home has an original masonry fireplace that hasn’t been used in years, we’ll sweep the flue, check the clay tile liner, and flag any clearance or moisture issues while we’re there. One appointment covers both. That’s the whole point of working with a full-service shop instead of a vent-only franchise.
On most 1940s – 50s Compton bungalows, the dryer vent exits through an exterior stucco wall, usually on the side or rear of the house near the laundry room. But we also find runs that terminate in the attic or crawlspace, dumped into open space under the house. The only way to know is to trace it. We’ll do that during the inspection and show you photos of the full path, including the exterior termination point. If it’s not venting outside, we’ll route it properly. Call (866) 520-4943 for a free estimate and a straight answer.
If your dryer is taking forever, your laundry room smells warm when the machine runs, or you just bought a 1950s stucco house in Compton and don’t know what’s behind the dryer, call us. We’ll clean it, inspect it, and if it needs new ducting, we’ll install rigid metal the right way. One company, start to finish. Call Firebrick Chimney Sweep at (866) 520-4943 for a free estimate.
Written by Nelson Quijada, Owner at Firebrick Chimney Sweep, serving Compton since day one.