Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Dryer Vent Cleaning Across Burbank
Dryer vent cleaning in Burbank typically costs $145 – $225 for a standard single-story home with a short exterior run, and $190 – $310 for foothill and two-story homes with longer vertical or roof terminations. We schedule Burbank appointments within the same week in most cases, and all quotes are free. Call (866) 520-4943 to book a sweep or ask about what you’re seeing behind the dryer.
Firebrick Chimney Sweep handles dryer vent cleaning as a core service, not a side job. Nelson Quijada leads our team with a working knowledge of combustion and ventilation systems that comes from working on chimneys and dryer exhausts in Burbank’s older housing stock every day. If your dryer vent is plugged, short-cycling, or you can’t remember the last time it was cleaned, we’ll trace the run, clear it, and tell you whether what’s there is actually safe to keep using.
Burbank’s pre-1960 bungalows and Lockheed-boom ranch homes in 91501, 91505, and 91506 were typically built with interior laundry closets and short, rigid-wall dryer runs. That means dryer vent fires here often hide behind original plaster on short runs that look fine from the outside. The lint packs at the first elbow, not in the long flexible duct many contractors expect. Foothill homes in 91504 and the Hillside District, by contrast, have long vertical runs through two-story framing that trap lint at every transition fitting. Cleaning each of these properly requires a different approach, and we bring both.
Why Firebrick Chimney Sweep Is Burbank’s Preferred Dryer Vent Cleaning Company
Most dryer vent companies in Burbank clean the duct and leave. We inspect the entire run because in this city, what the homeowner sees is almost never the whole story. A flapper that moves freely at the roofline gives false reassurance while the run below stays plugged. An exterior vent cover that looks clean from the driveway can be hiding a packed first elbow behind 1940s plaster. We pull the dryer when possible, check the transition fitting, and clean from both ends before we call the job done.
Burbank customers keep calling us back because we’re honest about what the vent actually needs. We work with professional-grade chimney and vent materials from HeatShield and Olympia Chimney, not whatever’s stocked at the hardware store, and we can provide Burbank HeatShield service when your flue needs resurfacing. Dryer vents and chimneys share the same core risk: restricted, dirty ventilation that becomes a fire. We treat both with the same seriousness, and that depth shows in every inspection.
Our Dryer Vent Cleaning in Burbank service covers the whole city: the flats along Magnolia and Olive, the hillside streets off Sunset Canyon and Bel Aire, the Rancho foothills, and up toward the Verdugo Mountains. We know the housing patterns here because we clean them. Nelson Quijada and our team are familiar with the difference between a 1950s ranch in 91505 and a two-story 1970s build in 91504, and which one is more likely to hide a crushed foil flex section behind old cabinetry.
Styles & brands we work with
Our Dryer Vent Cleaning Services in Burbank
Dryer Vent Inspection & Cleaning
A full inspection is where we start. We trace the run from the dryer to the termination, check the transition fitting behind the dryer, and look for anything that shouldn’t be there: foil flex sections, crushed elbows, gaps where the duct has separated, and lint buildup at the first elbow that’s invisible from the outside. Short runs in Burbank’s older bungalows can look fine from the exterior vent cover while the actual duct is blocked at the first turn. We don’t trust the flapper; we clean the run.
Roof & Second-Story Dryer Vent Cleaning
Foothill homes in 91504 and the Hillside District often have dryer vents that terminate through the roof. Long vertical runs through two-story framing collect lint at every transition fitting, and you cannot clear those by vacuuming from the dryer side alone. We use drill-driven rotary brush systems from both ends, including from the roofline where safe access allows. If your vent exits through the roof on a foothill home, we will tell you whether we can clean it from the ground or need roof access before we book.
Lint Blockage & Airflow Restoration
When a Burbank dryer starts taking two cycles to dry a load, the vent is almost always the culprit. We clear packed lint at elbows, transition fittings, and terminations, then confirm airflow has returned with a post-cleaning check at the vent exit. A jump back to spec means the dryer runs less, the motor lasts longer, and the vent isn’t turning into a fire source inside the wall.
Dryer Vent Repairs & Transition Fitting Replacement
We find a lot of homeowner-installed foil flex duct in Burbank’s older homes. It crushes, it kinks behind the dryer, and it’s a fire hazard we won’t leave in place. We replace it with rigid or semi-rigid metal duct, reconnect the transition fitting properly, and make sure the vent termination seats correctly. Chimney work is all we do, and dryer vents fall under the same combustion-safety discipline as everything else we service.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Burbank
We stock professional-grade vent and chimney materials for Burbank customers, not what you’d find in a hardware store aisle. That includes HeatShield for flue resurfacing, Olympia Chimney components, and a depth of trade supply knowledge that means the parts we install are the ones that hold up. Nelson Quijada built Firebrick on the principle that homeowners shouldn’t cycle through a sweep, a mason, and a materials supplier separately. If we find a problem during a dryer vent cleaning, we can usually resolve it in the same appointment because we carry the right parts with us.
See the difference
Before
After
Before
After
Before
AfterCommon Dryer Vent Cleaning Problems We See in Burbank Homes
- Lint packed at the first elbow behind plaster. Homes in 91505 and 91506 with original 1920s-1950s construction often have short rigid runs that look clear from outside. The lint builds at the first 90-degree turn behind the wall, and it will keep building until someone pulls the dryer and actually checks.
- Long vertical runs clogged at transition fittings. Two-story foothill homes in 91504 and the Hillside District with roof terminations trap lint where the duct changes direction. A flapper that moves freely at the roofline doesn’t mean the run below is clear.
- Crushed foil flex sections hidden behind old cabinetry. Older laundry closets in original bungalows hide kinked, homeowners-installed flexible duct. We see this regularly in Burbank’s pre-1960 stock, and it’s a fire hazard we replace on the spot.
- Ignored dryer vents during post-Santa Ana fire-safety checks. Burbank homeowners routinely request chimney spark arrestor inspections after Santa Ana wind events because fire season awareness runs high here. The dryer vent often gets skipped in the same appointment, even though lint-choked terminations are one of the leading causes of residential fires. We catch both.
Pricing for Dryer Vent Cleaning in Burbank, CA
A standard dryer vent cleaning in Burbank runs $145 – $225 for a single-story home with a short exterior wall termination. Two-story foothill homes, roof terminations, and runs longer than 20 feet run $190 – $310. If we need to replace a foil flex section with rigid metal duct, add $35 – $80 depending on the length. A full inspection with the cleaning is included. We give you a flat price before any work begins, and the estimate is free. Call (866) 520-4943 and we’ll quote your specific run over the phone.
We Also Serve Cities Near Burbank
We run Burbank appointments every week, and we also cover Universal City, North Hollywood, Glendale, and Studio City for dryer vent cleaning and full chimney service. If you’re just over the line from Burbank, you’re still in our service area, and the same team handles the job.
Serving Burbank, CA — Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Burbank
Once a year for a household of two or more that runs the dryer at least twice a week. Burbank’s older housing stock changes that math. Short rigid runs in 1920s-1950s bungalows pack lint at the first elbow faster than people expect, and foothill homes with long vertical runs should be cleaned every 9 – 12 months without exception. If you have a gas dryer, pets, or anyone in the house with allergies, lean toward the shorter interval. Call (866) 520-4943 and we’ll tell you honestly whether your vent is fine or needs a cleaning now.
Sometimes, but not always. If the run is straight with minimal transition fittings, we can clean a roof-terminated vent from the dryer side with a drill-driven rotary brush and confirm airflow at the roofline. If the run has multiple elbows or we suspect packed lint at upper transition fittings, we’ll need roof access. We’ll tell you which situation you have before booking, and the quote accounts for the roof work. Call (866) 520-4943 with your address and we’ll walk through it.
No, those are separate services, but we can schedule them for the same visit. Many Burbank homeowners book a post-Santa Ana chimney Level 1 inspection and a dryer vent cleaning in one appointment because the house needs both and we do both under one company. We spare you the back-and-forth of coordinating two contractors. Call (866) 520-4943 and we’ll set up the full visit.
In older homes, the buildup is invisible from the outside. A 1940s airplane-bungalow off Sunset Canyon in the Hillside District had a short rigid run that looked perfectly fine from the exterior vent cover. Our tech pulled the dryer and found the original duct packed solid at the first elbow behind the plaster. The homeowner had assumed the vent was clear because the exterior flapper moved freely. Newer construction in Burbank tends to have longer, concealed runs where lint collects at every bend, but at least the duct itself is more accessible. In either case, the only reliable way to know is to clean the run and see what comes out. Call (866) 520-4943 and we’ll show you what’s in yours.
Yes, if your dryer vents through the same masonry chimney structure. Cracked clay flue tiles from the 1994 Northridge earthquake and aging crowns are common in Burbank’s foothill and hillside homes, and they can allow heat and moisture into places it shouldn’t be. We often find dryer vents sharing a chimney chase with a deteriorating flue. We inspect the chimney structure alongside the dryer vent and tell you what actually needs fixing, with photo evidence and a plain-language explanation. Call (866) 520-4943 and we’ll schedule both inspections for the same visit.
Need a dryer vent cleaned in Burbank? Call (866) 520-4943 for a free estimate. We cover all Burbank zip codes, including 91505, 91506, 91507, and 91508, and we’ll get you on the schedule fast.
Written by Nelson Quijada, Owner at Firebrick Chimney Sweep, serving Burbank’s dryer vent and chimney needs with trade-specialized care.