Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Beverly Hills
A chimney sweep in Beverly Hills typically costs between $189 and $329 for a standard cleaning with a Level 1 inspection, and most appointments take 60 to 90 minutes once we’re on the roof. We run routes through Beverly Hills every week, covering the Flats, the Hills above Sunset, and the commercial-residential mix near Wilshire, so scheduling is rarely more than a few days out. Call (866) 520-4943 and we’ll give you a firm quote before we book, not after.
Why Firebrick Chimney Sweep Is Beverly Hills’s Preferred Chimney Sweep Company
Beverly Hills homeowners call us because we show them what’s actually inside their flue. Every sweep includes a video camera inspection we review together, on the spot, so you see exactly what we see. That matters here more than almost anywhere else: original clay-tile flues from the 1920s through 1950s often look fine from the firebox but are cracked from decades of seismic shifts. A sweep-only company might glance up, declare the liner shot, and quote you $6,000 for a reline. We’d rather hand you the camera and point to the actual crack.
Our service area covers all four Beverly Hills ZIP codes: 90210, 90212, 90213, and 90209. Nelson Quijada leads every inspection, and he’s the one who reviews the camera footage with you before any repair recommendation leaves our mouths. We don’t employ commission-based technicians, and nobody on our crew is incentivized to find problems that aren’t there. You get an honest read, documented on video, every time.
Styles & brands we work with
Fireplace Cleaning in Beverly Hills
Fireplace cleaning in Beverly Hills is more involved than in most markets because of what’s burning here: decades-old masonry fireplaces that haven’t been used in six months, sitting under uncapped flues that have quietly collected debris, nests, and dust. A standard cleaning removes soot and creosote from the firebox, smoke shelf, damper, and the first run of flue liner. It also includes a visual check of the firebox-to-flue connection, which is where we find problems on remodeled Beverly Hills homes.
Rotary Creosote Removal
When a flue shows glazed, tar-like creosote, hand brushes don’t cut it. We use a rotary chain system that scrapes the liner back to bare surface without gouging clay tiles. On a recent Beverly Hills job above Sunset, a homeowner called us after a neighbor’s post-fire reminder. The camera showed third-degree creosote glazing the smoke chamber. We removed it with the rotary chain and handed her the before and after video for her records.
Soot and Debris Clearing
Most Beverly Hills fireplaces produce light soot, not heavy creosote, because fires here are short and decorative. But an uncapped flue in the dry months becomes a debris trap. We clear nests, leaves, and wind-blown material from Santa Ana events, then check the rain cap and spark arrestor so the problem doesn’t return with the next wind event.
Chimney Services in Beverly Hills
Chimney services in Beverly Hills extend well beyond sweeping. Because this housing stock runs from 1920s Spanish Colonial and Tudor estates in the Flats to mid-century modern and contemporary builds in the Hills, we regularly encounter mix-and-match flue configurations created by remodels. A chimney that has been partially rebuilt, relined, or had a new firebox installed often hides gaps where creosote can build up behind the damper. Our job is to verify the whole run, not just polish the part you can see.
Level 1 and Level 2 Inspection
A Level 1 inspection is the standard visual check that accompanies every sweep, covering the accessible portions of the firebox, damper, smoke chamber, and flue. A Level 2 inspection goes further: we run a camera the full length of the flue, from firebox to crown, and document every crack, gap, or obstruction. Beverly Hills homeowners request Level 2 work most often after a Santa Ana wind event, a home purchase, or a remodel where the firebox was changed but the flue wasn’t.
HeatShield Flue Restoration
When the camera reveals damaged clay tiles but the chimney structure itself is sound, we often recommend HeatShield ceramic resurfacing instead of a full reline. HeatShield is a cast-in-place ceramic material that restores the flue’s interior to a smooth, insulated, code-compliant surface at a meaningful cost savings. Not every chimney qualifies, and we’ll tell you plainly when it doesn’t. We also work with Gelco and Olympia Chimney products where they fit the job better.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Beverly Hills
We stock parts and materials from HeatShield, Gelco, and Olympia Chimney, so when a Beverly Hills chimney needs more than a sweep, we’re not ordering from a big-box supplier and waiting a week. HeatShield ceramic resurfacing is our go-to for restoring cracked clay-tile flues without tearing out the chimney. Gelco components cover rain caps, chase covers, and termination hardware for prefab and masonry systems alike. Olympia Chimney supplies the liner and termination components we use on mid-century modern homes and newer builds. When we recommend a material, it’s one we keep on the truck or can source directly, because we’re the ones standing behind the install.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Beverly Hills Homes
- Third-degree creosote glazing in rarely used fireplaces. Beverly Hills fireplaces sit idle through the long dry season, and creosote doesn’t need heavy use to form. A layer of glazed creosote on the smoke chamber wall ignites at a lower temperature than you’d expect, and a Santa Ana-driven ember can set it off. We see this on hillside homes above Sunset more than anywhere else in our service area.
- Cracked original clay-tile flues flagged as “failing” by a quick visual look. A 1920s flue in Beverly Hills will show hairline cracks from decades of seismic activity. That’s normal and often cosmetic. We camera every flue and show you the actual cracks before any relining discussion. If the cracks are superficial and the structure is sound, you don’t need a $6,000 liner.
- Remodeled fireboxes with the original flue left in place. Beverly Hills remodels frequently add a new gas or wood-burning firebox while retaining the original clay flue. The connection between the two is almost never verified. A gap there lets creosote and heat escape into the chimney chase. We check it on every sweep and document what we find.
- Uncapped flues collecting debris and bird nests during the dry season. The Mediterranean climate in Beverly Hills means long months with no rain to wash out a flue. Nests, leaves, and wind-blown material accumulate quietly. When winter rains finally arrive, they soak the debris, and the moisture works into the mortar. A simple rain cap stops most of it; in the hills above Sunset, a spark arrestor is just as important.
Pricing for Chimney Sweep in Beverly Hills, CA
A standard chimney sweep in Beverly Hills runs $189 to $249 for a single flue with a Level 1 inspection. If we’re addressing heavy creosote glaze with the rotary chain, expect $260 to $329. A Level 2 camera inspection added to a sweep costs $125 to $175, and it’s the single best money you’ll spend if you own an older Beverly Hills chimney and want documented proof of its condition. HeatShield restoration pricing depends on the flue dimensions and the extent of damage; most Beverly Hills jobs fall between $1,800 and $3,400, which is roughly half what a full stainless reline runs here. We quote every job flat before we book, and we honor that price.
We Also Serve Cities Near Beverly Hills
If you’re outside Beverly Hills but still in the area, we run routes through Beverly Hills neighborhoods and into Century City, West Hollywood, Culver City, and Hollywood every week. The same camera-first Chimney Sweep process applies everywhere we go, and scheduling across these cities is typically within three to five days.
Serving Beverly Hills, CA — Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Beverly Hills
Yes, and that’s exactly what our rotary chain system is designed for. Clay tiles from the 1920s are more fragile than modern liners, so we inspect first with the camera and adjust brush pressure accordingly. If the tiles are severely cracked or spalling, we’ll tell you before we put any tool up the flue, and we’ll show you the footage so you understand what we’re seeing. Call (866) 520-4943 and we can schedule a look.
You need at minimum a Level 1 sweep, and we recommend a Level 2 camera inspection whenever Santa Ana winds have been strong enough to push debris down an uncapped flue. The camera shows us whether the debris was just wind-blown material or whether there’s a nest, a dislodged tile, or a structural issue further up. Beverly Hills hillside homes above Sunset are especially exposed to wind-driven debris, and the camera takes the guesswork out of it.
Watch for smoke backing up into the room on cold evenings, a whistling sound when the wind picks up, or soot stains around the damper. These suggest a gap at the firebox-to-flue connection, which is common when a new firebox is installed onto an old clay flue in Beverly Hills remodels. We verify that connection on every sweep and document it on camera. If there’s a gap, we’ll show you and recommend the right fix, often a Clay-to-Top connection or a short HeatShield application.
Yes. Mid-century modern homes in the Beverly Hills hills and the Flats frequently have prefab or factory-built chimney systems. We service units from all the major manufacturers and stock termination components and chase covers from Olympia Chimney. The inspection process is the same: camera the full run, check the chase, verify the termination cap. If the unit is original to the home and has been through several decades of California sun, we’ll document the condition so you can plan for replacement on your timeline, not on ours.
First-degree creosote is a dry, flaky soot that brushes off easily. Third-degree is a hard, glazed, tar-like coating that forms when fires burn at lower temperatures, which describes most Beverly Hills fires: short burns on cool evenings with the damper partly closed. Third-degree creosote is the dangerous kind because it ignites at a lower temperature and burns hotter. We see it regularly in Beverly Hills flues that haven’t been swept in years, and it’s a primary reason a camera inspection matters. If you’re not sure what’s in your flue, call (866) 520-4943 for a free estimate on a sweep with camera inspection.
Written by Nelson Quijada, Owner at Firebrick Chimney Sweep, serving Beverly Hills with camera-first chimney inspections and honest repair recommendations.