Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Dryer Vent Cleaning Across Temple City
Dryer vent cleaning in Temple City typically costs between $149 and $279 for a standard single-story ranch home, and most jobs are completed in under two hours. Those long, hidden duct runs under 1940s-1970s homes are exactly what we deal with every week. If your dryer is taking twice as long to dry clothes, or the laundry room feels humid when the machine runs, call Firebrick Chimney Sweep at (866) 520-4943 for a free estimate.
We work throughout the 91780 zip code, from the tree-lined streets north of Las Tunas down to the El Monte border. Our crews know Temple City’s housing stock, and that matters because the vent problems here are different from what you’d find in a newer development in Arcadia or a two-story custom off Santa Anita. We’re chimney and ventilation specialists, not a general handyman service, and we approach dryer vents with the same understanding of combustion and airflow that we bring to every chimney inspection. Temple City’s older homes hide their vent problems in crawlspaces and attics, and we find them. Call (866) 520-4943 and we’ll schedule a time that fits your week.
Why Firebrick Chimney Sweep Is Temple City’s Preferred Dryer Vent Cleaning Company
Firebrick Chimney Sweep is led by Nelson Quijada, and our approach to dryer vents comes out of our chimney background. Dryer vents and chimneys share the same core risk: restricted, dirty ventilation that becomes a fire. We treat both with the same seriousness. We sweep it, we repair it. One company, no referrals. When our tech finds a crushed duct or a code-violating termination during a Temple City dryer vent cleaning, we can fix it on the spot because repair capability is built into how we work. Many companies that clean dryer vents have to refer you to someone else when the vent itself is the problem. We don’t.
Temple City homeowners regularly tell us the same thing when we arrive: the last company they called cleaned the short section behind the dryer and never looked at what was happening under the house. Our process is different. We camera-inspect the full duct run whenever access allows, and we show you the footage. If a section is crushed, disconnected, or packed with lint 20 feet in from the termination, you’ll see it with your own eyes before we recommend anything. No recommendations without evidence, ever. We use professional-grade materials from companies like HeatShield and Olympia Chimney, not whatever is stocked at the hardware store. For Temple City’s mid-century homes, that distinction matters because the fix has to last decades, not a season.
Styles & brands we work with
Our Dryer Vent Cleaning Services in Temple City
Our dryer vent work in Temple City focuses on three areas: cleaning existing systems, inspecting runs that haven’t been looked at in years or decades, and replacing ducts that were never installed correctly in the first place. Here’s what that looks like in practice.
Dryer Vent Cleaning
Standard dryer vent cleaning in Temple City starts with the visible section behind the dryer, but it doesn’t end there. We run rotary brushes and air through the full duct length whenever the run is accessible, and we check airflow at the exterior termination. Temple City’s 1940s-1970s ranch homes often have ducts that run 20 to 35 feet from the dryer to the outside wall, far longer than modern code allows, with elbows that trap lint at the low points. A superficial brushing misses those low points. We get to them. Dryer Vent Cleaning is a core service for us, and for Temple City homes, the job usually takes 60 to 90 minutes on a standard single-story with an accessible crawlspace.
Dryer Vent Inspection
If you just bought a 1950s or 1960s home in Temple City and don’t know where the dryer vent runs or whether it’s ever been cleaned, we start with an inspection. We camera the duct, measure the total run length, count the elbows, and check the termination point. Many Temple City homes have vents that terminate into the crawlspace or the garage, which was once allowed but is now a code violation. You’ll see the footage. Then we tell you exactly what needs to happen and what can wait.
Dryer Vent Installation
When a Temple City home has a foil flex duct that’s crushed, sagging, or simply too long to ever work properly, cleaning won’t fix it. We install smooth 4-inch rigid duct, reduce the elbow count where the structure allows, and add a proper louvered wall cap. Temple City’s older homes need this repair more often than homeowners expect. A duct that’s been trapping lint for 30 years isn’t going to be rehabilitated by a brush and a vacuum. It needs to come out.
Dryer Vent Repair
Disconnected sections, crushed transition hoses, missing caps, improper terminations: we see all of it in Temple City crawlspaces. Repair work is done during the same visit whenever possible, using rigid duct and professional-grade components from manufacturers like Famco and Olympia Chimney. You shouldn’t need two different companies to clean your vent and then fix what the cleaning uncovered. We handle both.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Temple City
We stock and install components from professional chimney and ventilation manufacturers: HeatShield for ceramic flue resurfacing, Olympia Chimney for rigid duct and termination caps, and Famco for transition fittings. For Temple City residents, that means we’re not running to a big-box store mid-job when a 1950s vent needs a specific elbow or cap size. Our trucks carry the parts that match what these older homes actually need. When we install something in your crawlspace, it stays installed.
Common Dryer Vent Cleaning Problems We See in Temple City Homes
Most Temple City ranch homes were built before modern dryer vent codes existed. That single fact explains nearly every failure mode we encounter. Here’s what we find most often in the 91780 zip code:
- Crushed or disconnected foil flex duct in the crawlspace. The 4-inch foil duct that was common in 1950s and 1960s homes gets pinched behind the dryer or crushed where it passes through the floor. Lint escapes into the crawlspace, builds up around the dryer, and creates a fire hazard the homeowner never sees.
- Long duct runs with multiple elbows and no accessible cleanout. A 30-foot run with two or three 90-degree elbows can’t be fully cleaned with a basic brush-and-vacuum. Lint packs at the low points and along the bends, restricting airflow and giving a false sense of safety after a superficial cleaning.
- Terminations that vent into the attic, crawlspace, or garage. Common in Temple City’s original tract homes, where code enforcement was looser and builders took shortcuts. Moist, lint-laden air recirculates into the home, and the problem goes unnoticed until the dryer fails or the air gets noticeably humid.
- Sagging ducts that trap lint at the low point. Where a duct runs horizontally under a house without enough support, it sags into a low loop. Lint settles there, narrows the airflow path, and eventually blocks it. The dryer runs hotter, longer, and works harder every cycle.
See the difference
Before
After
Before
After
Before
AfterPricing for Dryer Vent Cleaning in Temple City, CA
A typical dryer vent cleaning in Temple City runs $149 to $249 for a single-story home with a standard accessible vent. If the duct runs under the house or through the crawlspace and we need to work from below, the range is $199 to $279. Two-story homes off Santa Anita with roof terminations can run $249 to $349, since roof access is slower and carries more risk. Most Temple City jobs fall in the $149 to $279 range. If we find a crushed duct or a code-violating termination, we’ll quote the repair separately before doing any work, and only after we’ve shown you the camera footage. Estimates are free. Call (866) 520-4943 and we’ll give you a firm number for your specific house.
We Also Serve Cities Near Temple City
Our crews cover the surrounding San Gabriel Valley communities, not just Dryer Vent Cleaning in Temple City. We work regularly in North El Monte, Rosemead, San Gabriel, and Arcadia. If you’re a few blocks outside the 91780 boundary, call anyway; our schedule routes through this area throughout the week, and we’ll fit you in.
Serving Temple City, CA — Our Local Coverage Area
We’re based in the Temple City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Temple City
Once a year for a household of three or more that does regular laundry. Temple City’s older duct runs collect lint faster than modern systems because they’re longer, have more elbows, and often use foil flex that catches lint along every rib. Twice a year is reasonable if you run the dryer daily or have pets. Call (866) 520-4943 and we’ll help you set a schedule that matches how your household actually uses the dryer.
The vent run is probably too long, too restrictive, or partially blocked with lint. A 1960s Temple City ranch home often has a 25-35 foot duct with multiple elbows, which is far longer than modern code allows, and that length alone slows airflow dramatically. Add packed lint at the low points and the dryer simply can’t push moisture out efficiently. We can measure the actual airflow and camera the duct to show you the restriction.
Yes. We regularly clean under-floor runs in Temple City’s crawlspace homes, and roof terminations off second-story additions are part of normal scope. We’ll access the duct from multiple points, camera it when needed, and confirm airflow at the termination. If the run is too long or too restricted to ever work properly, we’ll tell you and quote a proper replacement.
It’s more necessary, not less. A full lint trap means the dryer is producing a lot of lint, and a percentage of it is always getting past the trap and into the vent. In a Temple City home with a 30-foot foil flex duct, that escaping lint collects at the low points and narrows the airflow path over time. The trap catches maybe 70 percent. The vent is where the rest of it ends up.
Yes. We camera the duct whenever access allows, and we show you the footage before recommending any repair. That’s the rule: no recommendations without evidence you can see yourself. It’s how we work on every chimney inspection, and we apply the same standard to dryer vents. Call (866) 520-4943 and you’ll see exactly what’s in your duct.
The Hidden Problem in Temple City’s Mid-Century Ranch Homes
Most Temple City ranch homes vent the dryer through a long, undersized 4-inch foil flex duct that snakes through the crawlspace or attic, often crushed behind the dryer or sagging into a low loop that traps lint. These houses were built before modern dryer vent codes, so we routinely find duct runs exceeding 25 feet with multiple elbows. That’s a fire risk a simple brush-and-vacuum cannot fix. The lint packs at the low points, the airflow drops, and the dryer runs hotter every cycle. Lint is combustible, a dryer’s heating element is hot, and the only thing between them is the airflow that carries heat away. When that airflow drops, the margin narrows.
On a 1950s ranch off Las Tunas near Live Oak Park, our tech found exactly this. The dryer vent was a 4-inch foil flex duct running 30 feet under the house with two sharp 90-degree elbows and a crushed section behind the dryer. Lint had packed solid at the low point, and the homeowner had been drying clothes twice as long for years. We replaced it with smooth 4-inch rigid duct, added a proper transition and a louvered wall cap, and airflow jumped from a weak 800 FPM to over 1,800 FPM. Drying time dropped by half, and a real fire hazard came out with the old duct. That’s the kind of work this city’s homes need, and it’s the kind of work we do every week in Temple City.
If you’re in Temple City and you don’t know where your dryer vent runs or when it was last cleaned, call us. We’ll show you what’s there, and we’ll fix it properly if it needs fixing. The estimate is free, and the phone number is (866) 520-4943.
Written by Nelson Quijada, Owner at Firebrick Chimney Sweep, serving Temple City and the San Gabriel Valley.