Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Dryer Vent Cleaning Across Studio City
DuraFlex in Studio City dryer vent cleaning typically costs $145 – $225 for a standard single-family home and takes about an hour to complete. We’re in Studio City most weeks, often the same week you call, because the canyon streets and hillside neighborhoods are part of our regular route. If you live south of Ventura Blvd in the 91604 zip, or up in the hills off Laurel Canyon and Coldwater, we know exactly how these homes were built and where their vents tend to fail. Call (866) 520-4943 and we’ll walk you through what we’ll check before we ever step foot in the laundry room.
Why Firebrick Chimney Sweep Is Studio City’s Preferred Dryer Vent Cleaning Company
Most companies that clean dryer vents in Studio City treat the job as a standalone task. We don’t, because we’re chimney specialists first, and we see the same failure patterns across both systems. A vent that’s packed with lint next to a 1950s fireplace chase is a ventilation problem and a combustion problem at once. That’s the difference in how we work.
Studio City homeowners call us for two reasons. First, we show you the inside of your vent on camera before we recommend anything. Second, we can repair what we find. Crushed exterior cap off Coldwater Canyon? We replace it. Kinked flex run behind an earthquake-era wall modification? We re-route it. You don’t get handed a referral to another company. Nelson Quijada built this business around closing that loop, and it’s why we work with professional-grade suppliers like HeatShield and Olympia Chimney rather than whatever’s on the shelf at a big-box store.
Our Dryer Vent Cleaning team works throughout Studio City, from the ranch homes along Ventura Blvd up into the hillside streets where access and sightlines get genuinely difficult. We know which blocks have post-1994 Northridge rebuild work, which means we know where vent runs have been spliced, braced, or re-routed over the years.
Styles & brands we work with
Our Dryer Vent Cleaning Services in Studio City
Dryer Vent Cleaning With Camera Documentation
Every dryer vent cleaning we perform in Studio City includes a camera inspection before and after. You see the same footage we see. If a section of lint run behind a 1950s ranch wall is packed like felt, you’ll watch the camera push through it. We don’t ask you to take our word. The 91604 hillside homes especially benefit from this, because those vent runs are rarely straight and the problem is almost never at the lint screen.
Exterior Vent Cap Inspection and Replacement
In the brush-adjacent streets off Laurel Canyon and Coldwater, exterior dryer vent caps take a beating. Coyotes, raccoons, wind-blown debris, and the simple fact that many caps were installed decades ago and never upgraded means the first thing we check is what’s happening at the termination point. A crushed or mesh-screened cap backs up the entire system. We stock replacement caps and can install them the same visit.
Lint Run Clearing Behind Earthquake-Era Wall Modifications
This is a Studio City-specific problem we’ve learned to look for. After the 1994 Northridge earthquake, a lot of hillside homes had walls opened, braced, and rebuilt. Dryer vent runs that were originally short and straight sometimes became long, kinked, and routed around new structural work. Lint packs at the bends. You can’t see it from the laundry room, and a standard brush-only cleaning often misses it. Our camera finds it, and we clear it properly.
Vent Runs Near Chimney Chases and Fireplace Areas
Many Studio City homes built in the 1940s through 1960s have the laundry area located near the fireplace, which means the dryer vent run shares wall space with the chimney chase. That’s a bad combination when the vent leaks lint-laden air into older masonry that’s already dealing with spalling mortar and a damper that no longer seals. We check the full run, and when the footage shows moisture or lint interacting with the chase, we tell you plainly what needs attention and what can wait.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Studio City
When a dryer vent cleaning in Studio City turns up a damaged cap, a separated seam, or a run that needs re-routing, we don’t patch it with whatever’s cheap. We use professional-grade components from Olympia Chimney, Gelco, and Famco, the same manufacturers whose products we run in chimney systems across the Valley. It means the repair you get in your Studio City laundry room is built to a standard that matches the rest of your home’s ventilation, not a downgrade. We keep common replacement parts with us, so most cap replacements and seam repairs happen the same day we find them.
See the difference
Before
After
Before
After
Before
AfterCommon Dryer Vent Cleaning Problems We See in Studio City Homes
- Crushed exterior caps on hillside properties. In the brush-adjacent canyon streets off Laurel Canyon and Coldwater, wildlife and wind-blown debris flatten flimsy caps. Once the cap is compromised, the vent can’t exhaust, and every cycle pushes more lint back into the run.
- Kinked flex runs from post-Northridge wall modifications. Homes that were earthquake-braced or rebuilt after 1994 often had vent runs re-routed through new framing. The result is long, bend-heavy flex that packs lint where you can’t see it. The lint screen reads clean, and the vent is still blocked.
- Vents discharging near chimney chases. Older Studio City ranch homes frequently have the laundry room adjacent to the fireplace. Lint and moisture venting near a 60-year-old masonry chimney accelerates mortar spalling and can push damp air into the chase.
- Original clay-tile flue and vent crossover. We find homes where the dryer vent was tied into a stack or chase originally built for a wood-burning fireplace, usually during a 1990s remodel. The vent run was an afterthought, and the results show on camera. These are the jobs where our chimney background matters most.
Pricing for Dryer Vent Cleaning in Studio City, CA
A standard dryer vent cleaning for a single-family home in Studio City runs $145 – $225. Homes in the hillside streets of 91604 with longer runs, earthquake-era modifications, or hard-to-reach exterior caps land at the higher end, usually $200 – $300 when we’re also replacing a damaged cap or re-routing a section of flex. Here’s the breakdown:
- Standard vent cleaning (single-story ranch, straight run): $145 – $175
- Long or kinked run with camera inspection: $200 – $250
- Exterior cap replacement (Olympia Chimney or Gelco cap included): $45 – $95 on top of the cleaning
- Re-route of a kinked flex section: $120 – $200 depending on access
You’ll get a flat price before we start, and that price doesn’t change after we open the wall access or get on the roof. Call (866) 520-4943 for a free estimate. We’ll ask about your home’s age, the laundry room location, and anything you’ve already noticed, and we’ll give you a number that holds.
We Also Serve Cities Near Studio City
From our base serving the wider valley, we handle dryer vent cleaning across Studio City and the surrounding neighborhoods, including North Hollywood, Universal City, Sherman Oaks, and West Hollywood. If you’re just over the hill in the 91604 area or up against the 101, we’re close by and on these streets regularly.
Serving Studio City, CA — Our Local Coverage Area
We’re based in the Studio City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Studio City
The hillside streets off Laurel Canyon and Coldwater sit right against the brush interface, which means wind-blown debris, coyotes, and raccoons hit exterior vent caps constantly, and many of those caps are thin stamped metal from the original 1950s or 1960s build. Once a cap is mashed even slightly, the flapper stops opening fully and back-pressure builds inside the run. The permanent fix is a heavier professional-grade cap from Olympia Chimney or Gelco, installed so it can handle the brush zone. Call (866) 520-4943 and we’ll bring one on the truck.
Yes. We run a camera through the entire dryer vent run, from the back of the dryer to the exterior cap, on every Studio City job. In a 1950s ranch where the run may have been modified during post-Northridge repairs, that camera footage is how we find the kinks, seams, and packed sections a brush alone will miss. You’ll see the same screen we see before we recommend anything.
Not automatically. If the dryer vent run passes close to the chimney chase but doesn’t enter or share it, a standard camera inspection of the vent is usually enough. But if the footage shows moisture intrusion, heat damage, or the vent discharging directly against the chimney masonry, we’ll say so and recommend the appropriate next step based on what’s on screen. Nothing is recommended on habit, and nothing is recommended without footage you can look at. Call (866) 520-4943 and we’ll tell you exactly what we’d check.
Most Studio City homes should have the dryer vent cleaned every 12 to 18 months. Hillside homes off Laurel Canyon and Coldwater, especially with long runs, flimsy caps, or earthquake-era re-routes, often need it annually because the bends trap lint faster. If you have a 1950s ranch with the laundry room near the fireplace, annually is the safer schedule, because you’re protecting two ventilation systems at once.
It can, and it’s a common Studio City issue because of how many older homes here have the laundry adjacent to the fireplace. A dryer vent that’s leaking warm, lint-laden air into a shared wall cavity or discharging near the chimney chase adds moisture and pressure changes around the fireplace. That can disrupt the draft, especially in a 60-year-old clay-tile flue that’s already marginal. We check both when we’re on site, because we’re a chimney company that also handles dryer vents, not a vent-only contractor trying to guess. For a full assessment, call (866) 520-4943.
Written by Nelson Quijada, Owner at Firebrick Chimney Sweep.