Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Dryer Vent Cleaning Across Inglewood
Dryer vent cleaning in Inglewood typically costs $149 – $289 and takes about 60 – 90 minutes from setup to final flow check. The work clears lint, salt-corroded debris, and pest nesting from the full duct run, not just the visible section behind the dryer. If you live in 90301, 90302, 90303, 90304, or 90305, call (866) 520-4943 and we’ll get you on the schedule. We know Inglewood’s housing stock, we know how the marine layer eats at exterior vent components, and we carry stainless replacements on the truck so a rusted hood doesn’t turn a cleaning into a two-week wait.
Why Firebrick Chimney Sweep Is Inglewood’s Preferred Dryer Vent Cleaning Company
We work on the full ventilation picture of an Inglewood house: the dryer exhaust on the side wall or roof and the chimney on the ridge. That matters here because the same salt-laden marine air that corrodes a galvanized dryer vent collar is also eating at chimney caps, flashing, and crowns a few feet away. Most dryer vent companies in Inglewood will clean the duct and hand you a bill. We’ll clean the duct and point out the rust on the cap before it becomes a $600 replacement with a bird’s nest inside.
Nelson Quijada built Firebrick Chimney Sweep around one idea: a technician should be able to name what they’re seeing, explain what it means, and fix it in the same visit. Our team stocks stainless components, not whatever galvanized fitting is on the shelf. In Inglewood, where the coastal moisture never really dries out, that difference shows up in how long the repair lasts.
We’re in Hollywood, which puts us within a 25 – 40 minute drive of most Inglewood neighborhoods depending on traffic on the 405 or La Brea. Same-week scheduling is standard outside of the November – December rush.
Styles & brands we work with
Our Dryer Vent Cleaning Services in Inglewood
Dryer Vent Cleaning with Stainless Termination and Hood Replacement
Standard cleaning for Inglewood homes: we blow out the full duct run, remove lint and debris at both ends, and inspect the exterior hood. If the flap is rusted open or frozen shut from salt exposure, we replace it with a stainless hood and collar the same day. Leaving a corroded galvanized hood on a freshly cleaned duct means you’ll be calling again in twelve months. We’d rather fix it once.
Full Duct-Run Inspection for Salt-Corroded Collars and Crushed Transitions
The transition duct behind the dryer gets crushed, kinked, and sagged in older Inglewood laundry rooms where the dryer is jammed into a tight alcove. Salt corrosion weakens the thin metal from the outside at the same time lint builds up inside. We pull the dryer, inspect the transition, and tell you plainly if it can be cleaned or should be replaced. If it’s foil or plastic, we recommend rigid stainless or semi-rigid aluminum replacement. No upselling; the photo report shows what we saw.
Bird-Nest and Pest-Debris Removal from the Exterior Duct Run
When the exterior flap seizes open in Inglewood, birds and rodents treat the duct as an entry. Nests in the transition or the first few feet of the run block airflow and press lint against the metal, which is exactly how dryer fires start. We clear the nesting material, clean the full run, and install a stainless hood with a functioning damper and pest screen so the entry closes properly.
Rooftop and Wall-Cap Termination Sealing
Many Inglewood homes with second-floor laundry rooms vent through the roof or high on a side wall. Marine damp and rain get in where the termination cap has lost its seal or screen. We inspect rooftop and wall caps as part of every cleaning, reseal flashing when needed, and replace caps that are past saving. On roof work we use proper fall protection and walk the surface carefully rather than reaching from a ladder.
Trusted Brands We Service in Inglewood
We carry HeatShield, Olympia Chimney, and Famco components on the truck for most Inglewood service calls. Those are professional-grade trade brands, the same ones chimney and ventilation contractors across the country use. When we replace a corroded Inglewood dryer hood, it’s not a big-box galvanized fitting that rusts in two seasons. We use stainless terminations and hardware that hold up against the marine layer. You won’t wait on a parts order; if it’s a common failure, it’s already on the truck.
See the difference
Before
After
Before
After
Before
AfterCommon Dryer Vent Cleaning Problems We See in Inglewood Homes
- Hood flaps seized open from salt corrosion: The exterior flap on an Inglewood dryer vent takes direct marine moisture. Galvanized flaps rust open or freeze shut. Open means birds and rodents get in; shut means the dryer can’t exhaust, and the thermal fuse will eventually trip. Both are common in 90301 – 90305.
- Crushed transition ducts behind the dryer: Inglewood’s 1920s – 1950s bungalows and post-war tract homes often have tight laundry closets that force the dryer hard against the wall. The foil or plastic transition gets kinked to half its diameter, trapping lint in a short, hot section of duct. We see this on most first-time cleanings in older Inglewood homes.
- Rusted galvanized collars at the wall or roof penetration: The collar where the duct exits the house takes years of damp coastal air. In Inglewood, by the time a homeowner notices rust streaking down the stucco, the collar is usually perforated and needs replacement. Stainless is the fix.
- Bird and rodent nesting in ducts with missing or damaged screens: A missing termination screen is an open invitation. Inglewood’s tree-lined neighborhoods like Morningside Park and the areas around Rogers Park have large bird populations, and a dryer duct with a failed damper becomes a nesting cavity within weeks during spring.
Pricing for Dryer Vent Cleaning in Inglewood, CA
A straight dryer vent cleaning in Inglewood runs $149 – $229 for a single-story home with a wall termination and a duct run under 15 feet. Two-story homes, roof terminations, longer runs, and ducts clogged with nesting material typically land at $189 – $289. If we’re replacing a salt-corroded hood and collar, add $45 – $110 for stainless components and labor, depending on the configuration. Replacing a crushed foil transition with semi-rigid aluminum runs $35 – $85. A full rigid stainless duct replacement is a different job and gets priced on site after we measure the run. Estimates are free, and we tell you the price before work begins. Call (866) 520-4943 for an exact quote based on your setup.
We Also Serve Cities Near Inglewood
Our team works throughout the South Bay and surrounding areas, including Inglewood plus Hawthorne, Del Aire, Lennox, and Alondra Park. Many of our Inglewood calls come from homeowners right over the city line who didn’t realize we cover the whole area. Same-week scheduling applies everywhere we serve.
Serving Inglewood, CA — Our Local Coverage Area
We’re based in the Inglewood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Inglewood
Salt-laden marine air corrodes the galvanized flap hinge or the spring that closes it. Once the spring fails, the flap hangs open permanently, which lets birds in and lets damp air sit in the duct year-round. This is a coastal failure mode we see constantly in Inglewood and almost never inland. The fix is a stainless hood and damper assembly, which we install during a standard vent cleaning. Call (866) 520-4943 and we’ll get it done.
Every 12 months for most Inglewood households. If you dry daily laundry for a family of three or more, or if your dryer is more than 10 years old and runs long cycles, every 6 – 9 months is safer. Homes near the coast with older galvanized terminations should add an exterior inspection annually; rust opens holes in hoods faster than people expect.
Both, but the outside fails first. The hood, flap, and termination collar are directly exposed to the marine layer and they’re almost always galvanized steel. The duct run inside the wall or attic is more protected, but where the duct meets the exterior penetration, moisture wicks inward and starts corrosion at the seam. Over years, that short section between wall and hood rots from the outside in. We see it most on Inglewood homes built before 1980 with original terminations.
Very likely. A restricted vent or partially crushed transition duct keeps moisture in the drum and makes the dryer run longer to do less. In Inglewood, we’ve pulled bird nests, years of packed lint, and rusted damper flaps out of ducts where the homeowner was sure the dryer itself was dying. We inspect the full run and do a flow check after cleaning so you can see the improvement. Call (866) 520-4943 if you’re tired of double drying; it’s usually the vent, not the machine.
Yes, and we don’t charge extra for a visual assessment while we’re on your roof or walking the exterior. Inglewood homes with wood-burning fireplaces usually have the same salt-driven corrosion on the chimney cap and flashing that we find on dryer terminations. Nelson Quijada’s approach is to address the whole ventilation picture in one visit. If the chimney needs sweeping or repair, we’ll show you photos and explain the work, but nothing gets recommended or done without your approval.
Call Firebrick Chimney Sweep at (866) 520-4943 for dryer vent cleaning in Inglewood. Free estimates, honest diagnosis, and stainless components that last through the marine layer.
Written by Nelson Quijada, Owner at Firebrick Chimney Sweep, serving Inglewood and the surrounding area.