Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Glendale, CA
Chimney repair in Glendale is rarely a simple patch job. The homes here were built between the 1920s and 1970s, which means we’re dealing with original brick and clay-tile chimneys that have survived earthquakes, Santa Ana winds, and decades of dry heat. Firebrick Chimney Sweep handles the full scope: sweeping, inspection, liner work, crown repair, flashing, and cap replacement. If you’ve got a cracked flue or a leaking chimney in Glendale, call (866) 520-4943 and we’ll tell you what’s actually going on.
Why Glendale Homes Are Different
Glendale’s housing stock spans distinct eras, and each one has its own chimney profile. The Spanish Colonial Revival and Craftsman bungalows from the 1920s through the 1940s dominate neighborhoods like Rossmoyne, Adams Hill, and El Miradero. These homes often have original unreinforced brick chimneys with clay-tile liners that were never designed for modern heating appliances. After the 1994 Northridge earthquake, many homeowners paid for cosmetic mortar repairs that concealed deeper structural cracking. We find that when we open up an inspection camera.
The 1950s through 1970s ranch homes in the Verdugo foothills tell a different story. Many were built with narrow flues sized for gas or decorative fireplaces, then retrofitted for wood burning when new owners wanted real fires. A narrow flue with a wood fire means creosote accumulates faster, and downdraft problems become common. The hot, dry Glendale summers bake creosote into a hardened glaze that’s harder to remove than the fluffy stuff you get in humid climates. And after brush-fire season, when the Santa Anas blow through, we recommend inspections more frequently than the standard once-a-year advice.
Glendale is also a heavily Armenian and Persian community. Wood-burning fireplaces are central to many family gatherings and holiday traditions, especially in the foothills and in those original bungalows. That means chimneys here get used, and they get used seasonally after sitting idle through the long dry stretch. A chimney that sits unused for months in dry heat develops different problems than one that runs all winter. Mortar joints loosen. Liners crack from thermal shock when the first fire hits a cold flue. These are Glendale-specific realities, and they shape how we inspect and repair.
Styles & brands we work with
Our Main Glendale Services
Most Glendale homeowners call us for one of two things: a chimney sweep before burning season, or a dryer vent cleaning after a lint buildup scare. Here’s what each involves in this city.
Chimney Sweep in Glendale
A chimney sweep in Glendale has to account for the local housing stock. In those 1920s bungalows, we’re often the first company to look inside a flue in a decade. We use rotary brushes and a HEPA-filtered vacuum to keep the work clean inside your home, and we inspect the liner and mortar as part of every sweep. After brush-fire season or a stretch of Santa Ana winds, we recommend homeowners get the chimney checked even if they haven’t burned much. For details on what a sweep includes and typical timing, see our Chimney Sweep in Glendale page.
Dryer Vent Cleaning in Glendale
Dryer vents and chimneys share the same core risk: restricted, dirty ventilation that becomes a fire. In Glendale, where many homes have older laundry rooms with long or convoluted vent runs, lint can accumulate quickly. We clean dryer vents with the same thoroughness we bring to chimney work, because a clogged dryer vent is a combustion hazard no different from a creosote-choked flue. Read more on our Dryer Vent Cleaning in Glendale page, including how often Glendale homes need it.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Glendale
Chimney repair in Glendale often means digging into problems that started decades ago. The city’s 1920s-to-1940s bungalows have original masonry that’s been through at least one major earthquake and countless dry-season expansion and contraction cycles. What looks like a small crack in the crown is frequently the visible edge of a compromised chimney system. And when a homeowner has been flagged by a home inspector or insurance carrier for chimney deficiencies, the repair usually can’t be postponed. We sweep it, we repair it. One company, no referrals. That’s the point of working with Chimney Repair specialists who understand Glendale’s housing stock rather than a general handyman service.
Chimney Cap Installation
Signs you need it
You can see rain, leaves, or bird nesting material entering the flue, or you notice water staining on the ceiling near the fireplace after a storm.
What it costs in Glendale
Chimney cap installation in Glendale typically runs $300 to $700, depending on the flue size and whether a custom cap is needed for an odd-shaped crown.
How we do it
We measure the flue, select a stainless or copper cap sized for Glendale’s wind conditions, anchor it to the crown, and seal the attachment points.
Chimney Liner Installation
Signs you need it
Your inspection camera shows cracked or missing clay-tile liner sections, or you have an unlined flue that an inspector has flagged for wood-burning use.
What it costs in Glendale
Chimney liner installation in Glendale typically runs $2,500 to $6,500, with the higher end covering longer flues and multi-story access common in foothills homes.
How we do it
We remove or prep the damaged liner, install a DuraFlex stainless liner sized to the flue, insulate where needed, and reconnect the appliance or fireplace.
Chimney Flashing Repair
Signs you need it
Water is entering where the chimney meets the roof, showing up as damp drywall or mold near the fireplace chase or attic.
What it costs in Glendale
Chimney flashing repair in Glendale typically runs $450 to $1,200, depending on roof pitch and whether the existing flashing is salvageable.
How we do it
We lift the surrounding shingles, remove the old flashing, install stepped flashing with proper counter-flashing, and seal with high-temperature roofing sealant.
Chimney Crown Repair
Signs you need it
The concrete crown on top of your chimney is cracked, spalled, or missing in sections, letting water into the masonry below.
What it costs in Glendale
Chimney crown repair in Glendale typically runs $500 to $1,500, depending on whether we’re patching with a new pour or doing a full crown replacement.
How we do it
We clean and prep the existing crown surface, build a form if needed, pour a proper concrete crown with an overhang drip edge, and seal it.
What Chimney Repair Costs in Glendale
| Item | Typical range in Glendale |
|---|---|
| Chimney cap installation | $300 – $700 |
| Chimney liner installation | $2,500 – $6,500 |
| Chimney flashing repair | $450 – $1,200 |
| Chimney crown repair | $500 – $1,500 |
These are the ranges we quote most often in Glendale. Every repair starts with a camera inspection so you see exactly what needs work before we touch anything. For an exact quote on your chimney, call (866) 520-4943.
Do I really need a new liner?
Only if the camera shows damage that can’t be safely resurfaced. In many Glendale chimneys, clay tiles are cracked but the flue is structurally sound, and a HeatShield ceramic resurfacing job costs far less than a full liner replacement. We’ll show you the footage and explain the difference before you decide.
Can you fix earthquake damage in a Glendale chimney?
Yes. We inspect for the specific failure pattern Northridge-era shifts caused: cracked mortar joints, separated flue tiles, and crown movement. Repairs address the structural issue, not just the visible crack. Call (866) 520-4943 and we’ll schedule a camera inspection.
Brands We Service in Glendale
We work with six recognized chimney-industry brands, and on Glendale jobs we most often install Copperfield caps and dampers, Gelco flashing, and Olympia Chimney liners. Parts are stocked for quick turnaround on standard Glendale chimney profiles. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Glendale, CA
| Service | Typical range in Glendale |
|---|---|
| Chimney sweep (standard) | $180 – $340 |
| Chimney cap installation | $300 – $700 |
| Chimney liner installation | $2,500 – $6,500 |
| Chimney flashing repair | $450 – $1,200 |
| Chimney crown repair | $500 – $1,500 |
| Dryer vent cleaning | $150 – $300 |
What pushes Chimney Repair prices up in Glendale is access. Foothills homes often require longer ladder runs and steeper roof work, and older bungalows frequently have flues that need custom cap fabrication. We agree on the price before any work starts, so the number we quote is the number you pay.
Neighborhoods We Serve in Glendale
We work across Glendale, from the 1920s bungalows of Rossmoyne and Adams Hill to the foothills ranch homes in Montrose and La Crescenta. Each area has a different chimney profile, and we plan access and equipment accordingly.
- Rossmoyne
- Adams Hill
- El Miradero
- Montrose
- La Crescenta
Most Glendale neighborhoods are within a 30 to 45 minute drive for us. We schedule by ZIP code to keep drive time efficient and appointments reliable.
Service Area – Cities Near Glendale
Firebrick Chimney Sweep also serves homeowners in Burbank, CA, La Cañada Flintridge, CA, Echo Park, CA, and Silver Lake, CA. Each area has its own housing stock and chimney conditions, and we bring the same Glendale-level detail to every inspection and repair.
Serving Glendale, CA — Our Local Coverage Area
We’re based in the Glendale area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Glendale
We typically schedule Glendale appointments within one to two weeks. During peak burning season, which in Glendale starts when the first cool evenings arrive in late October, availability tightens. Call (866) 520-4943 and we’ll find the earliest open slot.
Most chimney repair work in Glendale does not require a permit, but some foothills HOAs have exterior modification rules that apply to visible changes like cap replacement. We’ll tell you if your job might need HOA review, and we can provide the spec sheets HOAs often request.
Yes. We provide a written inspection report with camera photos that you can submit to your insurance carrier or home inspector. The report states what needs repair, what can wait, and what’s in good shape, so you’re not being sold work you don’t need.
If you need chimney repair, chimney sweeping, or dryer vent cleaning in Glendale, call Firebrick Chimney Sweep at (866) 520-4943 for a free estimate. We’ll put eyes on the problem and tell you straight what needs to happen.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Glendale Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
— Carmen Garcia"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
— Gabriela Torres"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
— Robert Sullivan