Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Silver Lakes, CA
Chimney repair in Silver Lakes keeps coming back to one fact: most of these homes sit empty for months between visits. A flue that has not been burned in eight months will collect dust, creosote, bird nests, and the kind of fine Mojave sand that works its way into every gap in a chimney crown. We inspect, sweep, and repair chimneys and dryer vents in Silver Lakes year-round, and we see the same pattern again and again: a part-time resident arrives for the winter, lights the first fire of the season, and discovers the chimney has degraded while the house was closed up. Call (866) 520-4943 when you want a full inspection, not just a brush through the flue.
Why Silver Lakes Homes Are Different
Silver Lakes is a master-planned community built around a golf course and a chain of man-made lakes in the Mojave High Desert. Most of the housing stock went up between the late 1980s and the mid-2000s. That means stucco-clad single-family homes, golf-course properties, and a large share of factory-built or masonry fireplaces with wood-burning or manufactured inserts. The ZIP code is 92342, and a significant portion of the homes are second properties or retirement residences that sit closed for much of the year.
The climate does the rest. Very hot, dry summers bake the exterior masonry and any exposed flashing. Cold winter nights arrive suddenly, and high-wind events push desert dust and sand into flues and rooflines. A chimney that sat idle through a long summer will have dried creosote inside, often mixed with bird nesting material and fine grit. The first fire of the season can then burn hotter and dirtier than a chimney in year-round use. For Silver Lakes part-timers, the cleaning and inspection cycle follows an “open-the-house” cadence rather than a steady annual schedule. That changes what we look for and how we time the work.
Styles & brands we work with
Our Main Silver Lakes Services
Two services account for most of the calls we take from Silver Lakes homeowners: chimney sweeping ahead of the winter season, and dryer vent cleaning for the same seasonal-open-the-house reason. Both address ventilation that has sat unused long enough to collect debris.
Chimney Sweep in Silver Lakes
A chimney sweep in Silver Lakes is rarely a quick brush-through. Homes that sit empty for months develop blockages that full-time residences do not see: bird nests built during the quiet summer, desert dust packed into the smoke shelf, and creosote that has dried hard against the flue walls. We remove the blockage, sweep the full flue, and inspect the firebox, damper, cap, and crown while we are up there. If the home has not been burned in a year or more, we always check for hidden cracks or liner damage before the first fire. Chimney Sweep in Silver Lakes covers that full process in detail.
Dryer Vent Cleaning in Silver Lakes
Dryer vents in Silver Lakes share the same seasonal profile as chimneys: long idle stretches, dry desert air, and fine dust that settles into the vent run. Lint builds up inside the duct, and a dryer that sat unused for months can push that lint into a dangerous accumulation on the first load. We clean the full vent run from the dryer to the exterior termination, clear the bird guard or flap, and confirm the airflow is moving the way it should. Dryer Vent Cleaning in Silver Lakes explains the service in more detail.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Silver Lakes
Silver Lakes homes built in the 1980s and 1990s are now at the age where chimney crowns crack, flashing pulls away, and clay tile liners begin to spall. The desert makes it worse: hot summers expand the masonry, cold winter nights contract it, and high winds work against any flashing that was not sealed properly. A chimney that passes a sweep may still have a cracked crown or a rusted cap letting moisture into the chase. Firebrick Chimney Sweep handles Chimney Repair in addition to cleaning, so a problem found during the sweep can be fixed by the same company, with the same inspection notes, without sending you to a mason or a general contractor.
Chimney Cap Installation
Signs you need it
A missing, rusted, or undersized cap lets rain, birds, and desert dust into the flue, and Silver Lakes homes that sit empty for months are the most common place we find this.
What it costs in Silver Lakes
A new chimney cap install in Silver Lakes typically runs $250 to $450 for the cap and labor, depending on flue size and roof access.
How we do it
We remove the old cap or measure the bare flue tile, install a properly sized stainless or copper cap with a secure mechanical fastening, and seal the base so wind-driven rain cannot get underneath.
Chimney Cap Replacement
Signs you need it
Rust-through, bent screens, or a cap that has blown loose in a Mojave wind event means the cap is no longer doing its job, and you may see water stains or bird activity inside the firebox.
What it costs in Silver Lakes
Replacing an existing chimney cap in Silver Lakes typically falls between $275 and $475, with the higher end covering oversized or custom flue configurations.
How we do it
We remove the failed cap, inspect the flue tile underneath for damage, and fit a replacement cap matched to the flue dimensions, then verify the spark arrestor mesh is intact and the cap is secured against wind uplift.
Chimney Liner Installation
Signs you need it
Cracked clay tiles, missing mortar joints, or a flue that fails a level 2 camera inspection means the liner is no longer safely containing combustion gases and needs replacement.
What it costs in Silver Lakes
Chimney liner installation in Silver Lakes typically starts around $2,500 and can run to $5,000 or more depending on liner material, flue height, and whether an existing liner must be removed first.
How we do it
We size the new liner to the appliance and flue, install a professional-grade DuraFlex or similar stainless liner through the existing chase, insulate where required, and connect everything at the top and bottom with proper terminations.
Chimney Flashing Repair
Signs you need it
Water stains on the ceiling near the chimney, damp drywall in the attic, or visible gaps and lifted flashing at the roofline are the classic signs on Silver Lakes homes, especially after wind season.
What it costs in Silver Lakes
Chimney flashing repair in Silver Lakes typically runs $350 to $800 depending on how much flashing must be removed and whether the surrounding roofing material is disturbed.
How we do it
We remove the failed flashing, clean the masonry and roof interface, install new step and counter flashing with proper sealant, and confirm the water path is directed away from the chimney structure.
Chimney Crown Repair
Signs you need it
A cracked, spalled, or washed-out crown lets water into the chimney chase, and on Silver Lakes masonry chimneys, freeze-thaw cycles after rare winter moisture accelerate the cracking.
What it costs in Silver Lakes
Chimney crown repair in Silver Lakes typically falls between $600 and $1,300, with the range driven by crown size and whether the old crown must be fully removed.
How we do it
We remove the deteriorated crown surface, prepare the area, apply a new properly sloped crown or a professional-grade crown coat that sheds water away from the flue, and cure it before the next weather event.
What Chimney Repair Costs in Silver Lakes
| Item | Typical range in Silver Lakes |
|---|---|
| Chimney cap installation | $250 – $450 |
| Chimney cap replacement | $275 – $475 |
| Chimney liner installation | $2,500 – $5,000+ |
| Chimney flashing repair | $350 – $800 |
| Chimney crown repair | $600 – $1,300 |
These are the ranges we quote most often across Silver Lakes. Roof pitch, chase height, and whether the fireplace is factory-built or full masonry all move the final number. When we inspect, we give you a written scope with the exact price before any work starts, and we take camera photos of anything we recommend so you can see the condition with your own eyes.
Do I need a new chimney liner, or can I wait?
You wait only if the liner passes a camera inspection. Cracked or spalled clay tiles inside a flue are not something to defer, because the liner is the only barrier between combustion gases and the wood framing around the chimney chase. We show you the camera images before we ever quote a liner job.
Why does my Silver Lakes chimney cap fail so quickly?
High-wind events loosen mechanical fasteners, and the dry desert air accelerates rust on cheap galvanized caps. The fix is a properly sized stainless or copper cap with secure fastening, not another box-store cap. Call (866) 520-4943 and we will tell you what failed and what should go back on.
Brands We Service in Silver Lakes
We work with professional-grade chimney materials on Silver Lakes jobs: HeatShield ceramic resurfacing, Gelco and Olympia Chimney components, and Famco caps and terminations. These are trade-industry brands, not hardware-store substitutes. We keep common cap sizes and liner components stocked for faster turnaround on typical 92342 jobs. For more on the suppliers we use, see our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Silver Lakes, CA
| Service | Typical range in Silver Lakes |
|---|---|
| Chimney sweep | $179 – $349 |
| Level 1 inspection | $129 – $199 |
| Level 2 camera inspection | $250 – $450 |
| Chimney cap installation | $250 – $450 |
| Chimney cap replacement | $275 – $475 |
| Chimney liner installation | $2,500 – $5,000+ |
| Chimney flashing repair | $350 – $800 |
| Chimney crown repair | $600 – $1,300 |
| Dryer vent cleaning | $129 – $229 |
What pushes a Silver Lakes job toward the higher end is usually roof access and chase height: many of these homes have steep or complex rooflines, and the chimney is often a full two-story climb from the ground. You get a flat price before we start, and nothing gets added after the fact. If the camera shows a repair you did not expect, you see the footage before you approve a dollar of extra work.
Neighborhoods We Serve in Silver Lakes
We work across the Silver Lakes planned-community footprint, from the golf-course frontage and lake-adjacent streets to the quieter interior tracts built in the 1990s and 2000s. Most of our calls come from part-time owners who arrive for the winter and need the chimney checked before the first fire, and we schedule around those arrival windows.
- Lakefront and golf-course homes along the central water features
- Stucco single-family tracts in the northern and eastern sections of 92342
- Older sections built in the late 1980s and early 1990s
- Newer 2000s construction on the community’s outer edges
- Second-home and retirement properties throughout the Silver Lakes HOAs
Response time across the Silver Lakes area is usually within a few business days, and we coordinate with part-time owners who are only in town for a short window.
Service Area – Cities Near Silver Lakes
Firebrick Chimney Sweep serves Silver Lakes and the surrounding High Desert communities. If you are in Adelanto, CA, Victorville, CA, Mountain View Acres, CA, or Spring Valley Lake, CA, we can inspect, sweep, and repair your chimney and dryer vent with the same camera-backed process we use in Silver Lakes.
Serving Silver Lakes, CA — Our Local Coverage Area
We’re based in the Silver Lakes area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Silver Lakes
Most Silver Lakes jobs are scheduled within a few business days. If you are arriving for the winter and the house has been closed up, call (866) 520-4943 before you arrive so we can have the inspection done early in your stay, before the first fire.
Some Silver Lakes HOAs require that exterior work, including caps and crowns, maintain a consistent appearance from the street. We do not handle HOA paperwork, but we can tell you what the visible change will be and provide the details your HOA asks for. If you have an HOA package, bring it to the first visit.
Yes. A level 2 camera inspection on a Silver Lakes home catches liner damage, crown cracking, and flashing problems before you take title. We give you the footage and a written report you can take back to the seller or your agent during the contingency period.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Silver Lakes Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
— Gabriela Torres"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
— Robert Sullivan"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
— Laura Bennett