Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Sierra Madre, CA
Firebrick Chimney Sweep handles chimney repair, sweeping, and dryer vent work in Sierra Madre, and the houses here keep us honest. You’re looking at early-1900s Craftsman bungalows with original clay-tile flues, mid-century cottages, and foothill homes that burn wood all winter. The work we do in the 91024 and 91025 ZIP codes isn’t the same as flatland chimney work. It’s shaped by canyon moisture, Santa Ana winds, and masonry that’s been through decades of earthquakes. Calling it a routine sweep misses half of what’s actually going on. If you need a chimney looked at, call (866) 520-4943.
Why Sierra Madre Homes Are Different
Sierra Madre sits at the foot of the San Gabriel Mountains, and that location drives more chimney problems than almost anything else we see. The city runs cooler and damper than the San Gabriel Valley floor below it, especially along the canyon edges in the 91024 ZIP. A fireplace that’s decorative in Pasadena gets burned steadily here from November through March. That heavier use means creosote accumulates faster, and the cooler flue temperatures on damp mornings make condensation and acidic buildup worse.
The housing stock compounds it. Most of Sierra Madre’s older homes were built between the early 1900s and about 1960, and many still have their original fireplace brick and clay-tile liners. Clay tile was good for its era, but it doesn’t hold up forever. The hairline cracks we find in 80-year-old flues aren’t a fluke; they’re what happens when hot fires, moisture, and decades of minor seismic movement all work on the same material. Then there’s the earthquake factor. A chimney that’s been through enough of them without modern bracing will often show mortar degradation, shifted brick, or a cracked crown. Add the Santa Ana season, and an uncapped or meshless flue becomes a direct path for embers during red-flag days. None of this is alarmist. It’s just what the houses in this specific city present, and you need a chimney company that knows it.
Styles & brands we work with
Our Main Sierra Madre Services
Most calls from Sierra Madre come in for two services: a sweep on a fireplace that hasn’t been touched in years, or a dryer vent that’s become a fire hazard in a utility closet or garage run. Both are combustion-related ventilation problems, and we handle both under one roof.
Chimney Sweep in Sierra Madre
A sweep in Sierra Madre is rarely a light dusting. Homes in the foothill canyons and along the older streets near Baldwin Avenue burn heavily through the winter months, so we expect heavy creosote, sometimes glazed, in flues that are already compromised by age. We remove the buildup, check the liner condition, and tell you plainly whether the fireplace is safe to burn. If a cap or mesh screen is missing, you’ll hear about it, because ember intrusion during Santa Ana winds is a real concern here. For the full scope of the sweep, see Chimney Sweep in Sierra Madre.
Dryer Vent Cleaning in Sierra Madre
Dryer vents in Sierra Madre’s older homes are frequently long, narrow, and run through interior walls or crawlspaces, which is exactly what makes them collect lint fast. The smaller the vent, the more resistance, and the hotter the whole system runs. It’s not rare for us to find vents that haven’t been opened since a remodel. That’s a house fire waiting for a lint clog. We clean the full run and confirm the terminations are clear. It’s the same combustion-safety mindset, applied to laundry. For details on that service, see Dryer Vent Cleaning in Sierra Madre.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Sierra Madre
Chimney repair in Sierra Madre almost always means working on masonry that predates modern building code. The city’s Craftsman bungalows and mid-century cottages were built with clay-tile liners that crack with age, and decades of canyon dampness plus earthquake movement have taken a toll on mortar joints, crowns, and flashing. A cracked flue isn’t cosmetic: it lets heat and carbon monoxide escape into wall cavities, and it accelerates the deterioration of surrounding brick. We sweep it, we diagnose it, and we repair it with Chimney Repair handled by the same company that found the problem in the first place.
Chimney Cap Installation
Signs you need it
Your chimney has no cap, or it has an old cap that’s rusted through, missing mesh, or wired on loosely.
What it costs in Sierra Madre
Chimney cap installation in Sierra Madre typically falls between $200 and $650, depending on flue size and whether we’re replacing a damaged unit or adding one where none existed.
How we do it
We measure the flue, install a stainless or copper cap sized for proper draft, secure it to the crown, and confirm the mesh meets local ember-screening requirements for the foothill zone.
Chimney Cap Replacement
Signs you need it
The existing cap is bent, rusted through, missing its spark-arrestor mesh, or letting water into the flue during Sierra Madre’s wet foothill winters.
What it costs in Sierra Madre
Replacing a chimney cap in Sierra Madre usually costs between $250 and $600, including removing the old cap, inspecting the crown underneath, and securing the new unit properly.
How we do it
We remove the failed cap, check the crown and flue tile for damage it may have hidden, then install a correctly sized replacement with mesh screens that block embers and rain without choking draft.
Chimney Flashing Repair
Signs you need it
You’re seeing water stains on the ceiling near the chimney, damp brick after rain, or rusted, cracked, or lifted flashing where the chimney meets the roofline.
What it costs in Sierra Madre
Chimney flashing repair in Sierra Madre runs from $350 to $850, depending on how much of the flashing is accessible and whether the existing sealant has failed or the metal itself is corroded.
How we do it
We remove the old flashing, inspect the seam where chimney meets roof, install new flashing with proper step and counter-flashing, and seal it with high-grade roofing sealant.
What Chimney Repair Costs in Sierra Madre
| Item | Typical range in Sierra Madre |
| Chimney cap installation | $200 – $650 |
| Chimney cap replacement | $250 – $600 |
| Chimney flashing repair | $350 – $850 |
| Chimney crown repair | $500 – $1,200 |
Foothill jobs in the canyon neighborhoods push the upper end of these ranges when we’re working on steep roofs, multi-story chimneys, or masonry that’s already loose from earthquake movement. Every quote is given before work starts, so you know the number up front.
How do I know if my Sierra Madre chimney needs relining or just repair?
A camera inspection answers it. Small cracks can sometimes be addressed with HeatShield ceramic resurfacing; a fully broken clay-tile liner usually needs a DuraFlex stainless replacement. We show you the footage before recommending anything. Call (866) 520-4943 for an inspection.
Is chimney repair urgent in Sierra Madre, or can it wait?
If your liner is cracked or your flue has no functioning cap, it shouldn’t wait through the next burn season or Santa Ana event. The risk compounds with every fire. Call (866) 520-4943 and we’ll assess whether it’s a repair-now or a schedule-later situation.
Brands We Service in Sierra Madre
We work with professional-grade chimney components: DuraFlex stainless liners, HeatShield ceramic resurfacing, and parts from Olympia Chimney and Famco. We stock the common hardware, but special-order pieces arrive quickly. You can see the full product list at our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Sierra Madre, CA
| Service | Typical range in Sierra Madre |
| Chimney Sweep | $180 – $350 |
| Chimney Cap Installation | $200 – $650 |
| Chimney Cap Replacement | $250 – $600 |
| Chimney Flashing Repair | $350 – $850 |
| Chimney Crown Repair | $500 – $1,200 |
| Chimney Liner Installation | $2,500 – $6,000 |
| Dryer Vent Cleaning | $130 – $250 |
Steep canyon roofs, difficult access from narrow historic streets, and masonry that’s already loose from decades of seismic activity push prices toward the higher end in Sierra Madre. We give you a flat price before work begins, after we’ve seen the actual chimney.
Neighborhoods We Serve in Sierra Madre
We work throughout Sierra Madre’s residential streets, from the historic core near Baldwin Avenue out to the canyon-adjacent foothill roads. Response for most jobs within the city is typically one to three business days, and non-urgent tune-ups can be scheduled around your burn season.
- Historic downtown corridor
- Canyon foothill edges
- Baldwin Avenue corridor
- Upper Highlands
- East Sierra Madre foothills
Service Area – Cities Near Sierra Madre
Our Sierra Madre crews also work regularly in neighboring communities. If you’re in Arcadia, CA, East Pasadena, CA, Mayflower Village, CA, or Monrovia, CA, the same crews cover those areas with the same equipment and the same repair capability.
Serving Sierra Madre, CA — Our Local Coverage Area
We’re based in the Sierra Madre area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Sierra Madre
For most jobs in Sierra Madre, we can get a crew out within one to three business days. Gas insert issues, water leaks, and post-storm damage are prioritized. Call (866) 520-4943 and we’ll get you scheduled rather than waiting on a voicemail.
Most sweeps and basic cap or flashing repairs don’t require permits. If the job involves structural rebuilds or relining, we’ll tell you what the city requires before work starts. We handle the assessment, you handle the decision.
Yes. We inspect and service the venting for gas inserts in the same way we handle wood-burning fireplaces. The liner, the termination cap, and the draft matter just as much. Call (866) 520-4943 and mention what type of insert you have.
Contact Firebrick Chimney Sweep for chimney repair, sweeping, or dryer vent work in Sierra Madre. We serve the 91024 and 91025 ZIP codes with chimney home expertise that treats the firebox, the flue, and the crown as one system. Call (866) 520-4943 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Sierra Madre Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
— Gabriela Torres"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
— Robert Sullivan"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
— Laura Bennett